Siemens MC35 Bedienungsanleitung

AT Command SetSiemens Cellular EnginesMC35 ModuleMC35 Terminal Version: 04.00DocID: MC35_ATC_01_V04.00

AT Command SetMC35_ATC_01_V04.00 Page 10 of 238 02.04.20021 Introduction1.1 Scope of the documentThis document presents the AT Command Set for the Si

AT Command SetMC35_ATC_01_V04.00 Page 100 of 238 02.04.20024.34 AT+CPBW Write phonebook entryTest commandAT+CPBW=?ResponseTA returns location range

AT Command SetMC35_ATC_01_V04.00 Page 101 of 238 02.04.20024.35 AT+CPIN Enter PINTest commandAT+CPIN=?ResponseOKRead commandAT+CPIN?ResponseTA retur

AT Command SetMC35_ATC_01_V04.00 Page 102 of 238 02.04.2002PH-NET PIN ME is waiting for network personalisation pass-wordPH-NET PUK ME is waiting for

AT Command SetMC35_ATC_01_V04.00 Page 103 of 238 02.04.2002MC35 offers various options to verify the present status of network registra-tion: For exam

AT Command SetMC35_ATC_01_V04.00 Page 104 of 238 02.04.20024.35.1 What to do if PIN or password authentication fails?PIN1 / PUK1: After three failure

AT Command SetMC35_ATC_01_V04.00 Page 105 of 238 02.04.2002SIM locks: These are factory set locks, such as "PF", "PN", "PU&qu

AT Command SetMC35_ATC_01_V04.00 Page 106 of 238 02.04.20024.36 AT+CPIN2 Enter PIN2Test commandAT+CPIN2=?ResponseOKRead commandAT+CPIN2?ResponseTA re

AT Command SetMC35_ATC_01_V04.00 Page 107 of 238 02.04.2002Note that the PIN2 authentication remains active for 300s. This means, for exam-ple, that P

AT Command SetMC35_ATC_01_V04.00 Page 108 of 238 02.04.20024.37 AT+CPUC Price per unit and currency tableTest commandAT+CPUC=?ResponseOKRead commandA

AT Command SetMC35_ATC_01_V04.00 Page 109 of 238 02.04.20024.38 AT+CPWD Change passwordUse this command when you want to• change PIN1 or PIN2• cha

AT Command SetMC35_ATC_01_V04.00 Page 11 of 238 02.04.20021.2 Supported product versions and related documentsPlease note that this AT Command Set is

AT Command SetMC35_ATC_01_V04.00 Page 110 of 238 02.04.2002concerned, e.g. provider, operator, distributor etc. on the oneside and the manufacturer on

AT Command SetMC35_ATC_01_V04.00 Page 111 of 238 02.04.2002Example 3To change the "PS" lock password, using the correct old password:AT+CPWD

AT Command SetMC35_ATC_01_V04.00 Page 112 of 238 02.04.20024.39 AT+CR Service reporting controlTest commandAT+CR=?Response+CR: (list of supported &l

AT Command SetMC35_ATC_01_V04.00 Page 113 of 238 02.04.20024.40 AT+CRC Set Cellular Result Codes for incoming call indicationTest commandAT+CRC=?Res

AT Command SetMC35_ATC_01_V04.00 Page 114 of 238 02.04.20024.41 AT+CREG Network registrationTest commandAT+CREG=?Response+CREG: (list of supported &

AT Command SetMC35_ATC_01_V04.00 Page 115 of 238 02.04.2002Unsolicited result codeIf <n>=1 and there is a change in the ME network registration

AT Command SetMC35_ATC_01_V04.00 Page 116 of 238 02.04.20024.42 AT+CRLP Select radio link protocol param. for orig. non-transparentdata callTest com

AT Command SetMC35_ATC_01_V04.00 Page 117 of 238 02.04.20024.43 AT+CRSM Restricted SIM accessTest commandAT+CRSM=?ResponseOKWrite commandAT+CRSM=<

AT Command SetMC35_ATC_01_V04.00 Page 118 of 238 02.04.20024.44 AT+CSCS Set TE character setTest commandAT+CSCS=?Response+CSCS: (list of supported &

AT Command SetMC35_ATC_01_V04.00 Page 119 of 238 02.04.20024.45 AT+CSNS Single Numbering SchemeThe AT+CSNS command enables the ME to accept incoming

AT Command SetMC35_ATC_01_V04.00 Page 12 of 238 02.04.20021.3 ConventionsThroughout the document, the GSM engines are referred to as ME (Mobile Equipm

AT Command SetMC35_ATC_01_V04.00 Page 120 of 238 02.04.20024.46 AT+CSQ Signal qualityTest commandAT+CSQ=?Response+CSQ: (list of supported <rssi&g

AT Command SetMC35_ATC_01_V04.00 Page 121 of 238 02.04.20024.47 AT+CSSN Supplementary service notificationsTest commandAT+CSSN=?Response+CSSN: (list

AT Command SetMC35_ATC_01_V04.00 Page 122 of 238 02.04.20024.48 AT+CUSD Unstructured supplementary service dataTest commandAT+CUSD=?Response+CUSD: (

AT Command SetMC35_ATC_01_V04.00 Page 123 of 238 02.04.20024.49 AT+VTD=<n> Tone durationTest commandAT+VTD=?This command refers to an integer

AT Command SetMC35_ATC_01_V04.00 Page 124 of 238 02.04.20024.50 AT+VTS DTMF and tone generation (<Tone> in {0-9, *, #, A, B, C, D})Test comman

AT Command SetMC35_ATC_01_V04.00 Page 125 of 238 02.04.20024.51 AT+WS46 Select wireless networkTest commandAT+WS46=?Response(list of supported <n&

AT Command SetMC35_ATC_01_V04.00 Page 126 of 238 02.04.20025 AT commands originating from GSM 07.05 for SMSThe SMS related AT Commands are according

AT Command SetMC35_ATC_01_V04.00 Page 127 of 238 02.04.20025.2 AT+CMGD Delete SMS messageTest commandAT+CMGD=?ResponseOKParameterExecute commandAT+C

AT Command SetMC35_ATC_01_V04.00 Page 128 of 238 02.04.20025.4 AT+CMGL List SMS messages from preferred storeTest commandAT+CMGL=?Response+CMGL: (li

AT Command SetMC35_ATC_01_V04.00 Page 129 of 238 02.04.2002for SMS-COMMANDs:+CMGL: <index>,<stat>,<fo>,<ct>[<CR><LF&g

AT Command SetMC35_ATC_01_V04.00 Page 13 of 238 02.04.20021.5.1 Using parameters• Default parameters are underlined throughout this document.• Optio

AT Command SetMC35_ATC_01_V04.00 Page 130 of 238 02.04.2002Parameter<dt> GSM 03.40 TP-Discharge-Time in time-string format: “yy/MM/dd,hh:mm:ss±

AT Command SetMC35_ATC_01_V04.00 Page 131 of 238 02.04.20025.5 AT+CMGR Read SMS messageTest commandAT+CMGR=?ResponseOKExecute commandAT+CMGR=<ind

AT Command SetMC35_ATC_01_V04.00 Page 132 of 238 02.04.2002 0 “REC UNREAD” received unread message (i.e. new message) 1 “REC READ” r

AT Command SetMC35_ATC_01_V04.00 Page 133 of 238 02.04.2002used, and 140 characters according to the 8 bit GSM coding scheme.<index> integer typ

AT Command SetMC35_ATC_01_V04.00 Page 134 of 238 02.04.20025.6 AT+CMGS Send SMS messageTest commandAT+CMGS=?ResponseOKParameterExecute command1) If

AT Command SetMC35_ATC_01_V04.00 Page 135 of 238 02.04.2002ReferenceGSM 07.05Note• Use CTRL-Z at the end of input to send the message and return OK.•

AT Command SetMC35_ATC_01_V04.00 Page 136 of 238 02.04.20025.7 AT+CMGW Write SMS message to memoryTest commandAT+CMGW=?ResponseOKExecute command1) I

AT Command SetMC35_ATC_01_V04.00 Page 137 of 238 02.04.2002TPDU in hexadecimal format.<index> Index of message in selected storage <mem2>R

AT Command SetMC35_ATC_01_V04.00 Page 138 of 238 02.04.20025.8 AT+CMSS Send SMS message from storageTest commandAT+CMSS=?ResponseOKParameterExecute

AT Command SetMC35_ATC_01_V04.00 Page 139 of 238 02.04.20025.9 AT+CNMA New SMS message acknowledge to ME/TE, only phase 2+Test commandAT+CNMA=?Respo

AT Command SetMC35_ATC_01_V04.00 Page 14 of 238 02.04.20022 Standard V.25ter AT CommandsThese AT Commands are related to ITU-T (International Telecom

AT Command SetMC35_ATC_01_V04.00 Page 140 of 238 02.04.20025.10 AT+CNMI New SMS message indicationsTest commandAT+CNMI=?Response+CNMI: (list of supp

AT Command SetMC35_ATC_01_V04.00 Page 141 of 238 02.04.20022 SMS-DELIVERs, except class 2 messages and messages inthe message waiting indication group

AT Command SetMC35_ATC_01_V04.00 Page 142 of 238 02.04.2002ReferenceGSM 07.05Note• Parameters <mt>=2,3 and <ds>=1 are only available with

AT Command SetMC35_ATC_01_V04.00 Page 143 of 238 02.04.2002<usedx> Number of messages currently in <memx><totalx> Number of messages

AT Command SetMC35_ATC_01_V04.00 Page 144 of 238 02.04.20025.12 AT+CSCA SMS service centre addressTest commandAT+CSCA=?ResponseOKRead commandAT+CSCA

AT Command SetMC35_ATC_01_V04.00 Page 145 of 238 02.04.20025.13 AT+CSCB Select cell broadcast messagesTest commandAT+CSCB=?Response+CSCB: (list of s

AT Command SetMC35_ATC_01_V04.00 Page 146 of 238 02.04.20025.14 AT+CSDH Show SMS text mode parametersTest commandAT+CSDH=?Response+CSDH: (list of su

AT Command SetMC35_ATC_01_V04.00 Page 147 of 238 02.04.20025.15 AT+CSMP Set SMS text mode parametersTest commandAT+CSMP=?ResponseOKRead commandAT+CS

AT Command SetMC35_ATC_01_V04.00 Page 148 of 238 02.04.20025.16 AT+CSMS Select Message ServiceTest commandAT+CSMS=?Response+CSMS: (list of supported

AT Command SetMC35_ATC_01_V04.00 Page 149 of 238 02.04.20026 GPRS AT commands in accordance with GSM 07.07This chapter provides GPRS specific AT comm

AT Command SetMC35_ATC_01_V04.00 Page 15 of 238 02.04.20022.3 AT\Qn FlowcontrolExecute commandAT\Q<n>ResponseOKParameter<n> 0 AT\Q0 disa

AT Command SetMC35_ATC_01_V04.00 Page 150 of 238 02.04.20026.1.2 AT+CGACT PDP context activate or deactivateTest commandAT+CGACT=?The test command i

AT Command SetMC35_ATC_01_V04.00 Page 151 of 238 02.04.20026.1.3 AT+CGDATA Enter data stateTest commandAT+CGDATA=?The test command is used for reque

AT Command SetMC35_ATC_01_V04.00 Page 152 of 238 02.04.20026.1.4 AT+CGDCONT Define PDP ContextTest commandAT+CGDCONT=?The test command returns value

AT Command SetMC35_ATC_01_V04.00 Page 153 of 238 02.04.2002<PDP_type> Packet Data Protocol type is a string parameter whichspecifies the type of

AT Command SetMC35_ATC_01_V04.00 Page 154 of 238 02.04.20026.1.5 AT+CGQMIN Quality of Service Profile (Minimum acceptable)Test commandAT+CGQMIN=?The

AT Command SetMC35_ATC_01_V04.00 Page 155 of 238 02.04.2002Parameter<cid> numeric PDP Context Identifier; if no cid is specified,nothing will be

AT Command SetMC35_ATC_01_V04.00 Page 156 of 238 02.04.2002<peak> numeric parameter for the peak throughput class0 network subscribed valuePeak

AT Command SetMC35_ATC_01_V04.00 Page 157 of 238 02.04.2002at+cgqmin=1,0,0,0,1OKat+cgqmin?+CGQMIN:1,0,0,0,1,0OKat+cgqmin=1,1OKat+cgqmin?+CGQMIN:1,1,0,

AT Command SetMC35_ATC_01_V04.00 Page 158 of 238 02.04.20026.1.6 AT+CGQREQ Quality of Service Profile (Requested)Test commandAT+CGQREG=?The test com

AT Command SetMC35_ATC_01_V04.00 Page 159 of 238 02.04.2002<precedence> numeric parameter for the precedence class0 network subscribed value1 Hi

AT Command SetMC35_ATC_01_V04.00 Page 16 of 238 02.04.20022.5 ATD Mobile originated call to dial a numberExecute commandATD[<n>][<mgsm][;]T

AT Command SetMC35_ATC_01_V04.00 Page 160 of 238 02.04.2002<peak> numeric parameter for the peak throughput class0 network subscribed valuePeak

AT Command SetMC35_ATC_01_V04.00 Page 161 of 238 02.04.2002at+cgqreq=1,0,0,1OKat+cgqreq?+CGQREQ:1,0,0,1,0,0OKat+cgqreq=1,1OKat+cgqreq?+CGQREQ:1,1,0,1,

AT Command SetMC35_ATC_01_V04.00 Page 162 of 238 02.04.20026.1.7 AT+CGSMS Select service for MO SMS messagesTest commandAT+CGSMS=?The test command l

AT Command SetMC35_ATC_01_V04.00 Page 163 of 238 02.04.20026.1.8 AT^SGAUTH Set type of authentication for PPP connectionTest commandAT^SGAUTH=?Resp

AT Command SetMC35_ATC_01_V04.00 Page 164 of 238 02.04.20026.2 Modem compatibility commands to MTs supporting GPRSThis subclause describes how existi

AT Command SetMC35_ATC_01_V04.00 Page 165 of 238 02.04.20026.3.1 ATD *98# Request GPRS IP serviceExecute commandATD*98[*<cid>]#This command c

AT Command SetMC35_ATC_01_V04.00 Page 166 of 238 02.04.20026.3.2 ATH Manual rejection of a network request for PDP context activationExecute command

AT Command SetMC35_ATC_01_V04.00 Page 167 of 238 02.04.20026.4 Using GPRS AT commands (examples)6.4.1 Miscellaneous AT commandsDefining and using a C

AT Command SetMC35_ATC_01_V04.00 Page 168 of 238 02.04.2002All parameters of the QoS are initiated by default to the "network subscribed value (=

AT Command SetMC35_ATC_01_V04.00 Page 169 of 238 02.04.20026.5 Using the GPRS dial command ATDIn addition to the GPRS AT Commands you can use the &qu

AT Command SetMC35_ATC_01_V04.00 Page 17 of 238 02.04.20022.6 ATD><mem><n> Originate call to phone number <n> in memory <mem

AT Command SetMC35_ATC_01_V04.00 Page 170 of 238 02.04.20027 AT Commands for SIM Application Toolkit (GSM 11.14)SIM Application Toolkit (SAT) is a te

AT Command SetMC35_ATC_01_V04.00 Page 171 of 238 02.04.20027.1 AT^SSTA Remote-SAT Interface ActivationTest commandAT^SSTA=?Response^SSTA:(list of sup

AT Command SetMC35_ATC_01_V04.00 Page 172 of 238 02.04.20027.2 ^SSTN Remote-SAT NotificationProactiveCommandsEvery time the SIM application issues a

AT Command SetMC35_ATC_01_V04.00 Page 173 of 238 02.04.20027.3 AT^SSTGI Remote-SAT Get InformationTest commandAT^SSTGI=?Response^SSTGI:(list of suppo

AT Command SetMC35_ATC_01_V04.00 Page 174 of 238 02.04.20027.4 AT^SSTR Remote-SAT ResponseTest commandAT^SSTR=?Response^SSTR:(list of supported <s

AT Command SetMC35_ATC_01_V04.00 Page 175 of 238 02.04.20028 Siemens defined AT commands for enhanced functionsSelf-defined commands do not have to b

AT Command SetMC35_ATC_01_V04.00 Page 176 of 238 02.04.20028.2 AT^MONI Monitor idle mode and dedicated modeTest commandAT^MONI=?Response^MONI: (list

AT Command SetMC35_ATC_01_V04.00 Page 177 of 238 02.04.2002Dedicated channel:chann traffic channel numberNote: <chann> = h indicates frequency h

AT Command SetMC35_ATC_01_V04.00 Page 178 of 238 02.04.20028.3 AT^MONP Monitor neighbour cellsTest commandAT^MONP=?Response^MONP: (list of supported

AT Command SetMC35_ATC_01_V04.00 Page 179 of 238 02.04.20028.4 AT^SACM Advice of charge and query of ACM and ACMmaxTest commandAT^SACM=?Response^SAC

AT Command SetMC35_ATC_01_V04.00 Page 18 of 238 02.04.2002to called party)<;> Only required to set up voice calls. TA remains in command mode.Re

AT Command SetMC35_ATC_01_V04.00 Page 180 of 238 02.04.20028.5 AT^SBC Battery charging / discharging and charge controlThis chapter is only applicabl

AT Command SetMC35_ATC_01_V04.00 Page 181 of 238 02.04.2002Read commandAT^SBC?Response^SBC: <bcs>,<bcl>,<mpc><bcs> Connection

AT Command SetMC35_ATC_01_V04.00 Page 182 of 238 02.04.2002Unsolicited result code^SBC: UndervoltageThe message will be reported, for example, when yo

AT Command SetMC35_ATC_01_V04.00 Page 183 of 238 02.04.20028.6 AT^SCID Display SIM card identification numberTest commandAT^SCID=?ResponseOKIf error

AT Command SetMC35_ATC_01_V04.00 Page 184 of 238 02.04.20028.7 AT^SCKS Set SIM connection presentation mode and query SIM con-nection statusTest com

AT Command SetMC35_ATC_01_V04.00 Page 185 of 238 02.04.20028.8 AT^SCNI List Call Number InformationTest commandAT^SCNI=?ResponseOKExecute commandAT^

AT Command SetMC35_ATC_01_V04.00 Page 186 of 238 02.04.20028.9 AT^SCTM Set critical operating temperature presentation mode orquery temperatureUse t

AT Command SetMC35_ATC_01_V04.00 Page 187 of 238 02.04.2002ReferenceSiemensNoteImportant:• Please refer to the "Hardware Inferface Description&q

AT Command SetMC35_ATC_01_V04.00 Page 188 of 238 02.04.20028.10 AT^SDLD Delete the “last number redial“ memoryTest commandAT^SDLD=?ResponseOKExecute

AT Command SetMC35_ATC_01_V04.00 Page 189 of 238 02.04.20028.13 AT^SLCK Facility lockTest commandAT^SLCK=?Response^SLCK: (list of supported <fac&

AT Command SetMC35_ATC_01_V04.00 Page 19 of 238 02.04.20022.7 ATD><n> Originate call to phone number selected from active memoryThis comman

AT Command SetMC35_ATC_01_V04.00 Page 190 of 238 02.04.2002<mode> 0 unlock1lock2 query status<passwd> password<class> sum of integer

AT Command SetMC35_ATC_01_V04.00 Page 191 of 238 02.04.20028.15 AT^SMGO Set or query SMS overflow presentation mode or query SMSoverflowTest command

AT Command SetMC35_ATC_01_V04.00 Page 192 of 238 02.04.20028.16 AT^SMSO Switch off mobile stationTest commandAT^SMSO=?ResponseOKExecute commandAT^SM

AT Command SetMC35_ATC_01_V04.00 Page 193 of 238 02.04.20028.18 AT^SM20 Set M20 CompatibilityTest commandAT^SM20=?ResponseOKRead commandAT^SM20?Resp

AT Command SetMC35_ATC_01_V04.00 Page 194 of 238 02.04.20028.19 AT^SNFA Set or query microphone attenuationTest commandAT^SNFA=?Response^SNFA: (list

AT Command SetMC35_ATC_01_V04.00 Page 195 of 238 02.04.2002OKat^snfi?^SNFI: 5,1OKat^snfi=5,45OKat^snfa?^SNFA: 45OK8.20 AT^SNFD Set audio parameters

AT Command SetMC35_ATC_01_V04.00 Page 196 of 238 02.04.20028.21 AT^SNFI Set microphone path parametersTest commandAT^SNFI=?Response^SNFI: (list of s

AT Command SetMC35_ATC_01_V04.00 Page 197 of 238 02.04.20028.22 AT^SNFM Mute microphoneTest commandAT^SNFM=?Response^SNFM: (list of supported <mu

AT Command SetMC35_ATC_01_V04.00 Page 198 of 238 02.04.20028.24 AT^SNFO Set audio output (= loudspeaker path) parameterTest commandAT^SNFO=?Response

AT Command SetMC35_ATC_01_V04.00 Page 199 of 238 02.04.20028.25 AT^SNFS Select audio hardware setTest commandAT^SNFS=?Response^SNFS: (list of suppor

AT Command SetMC35_ATC_01_V04.00 Page 2 of 238 02.04.2002Document Name: AT Command SetSiemens Cellular EnginesVersion: 04.00Date: 02.04.2002Doc Id: M

AT Command SetMC35_ATC_01_V04.00 Page 20 of 238 02.04.20022.8 ATD><str> Originate call to phone number in memory with corre-sponding fieldT

AT Command SetMC35_ATC_01_V04.00 Page 200 of 238 02.04.20028.26 AT^SNFV Set loudspeaker volumeTest commandAT^SNFV=?Response^SNFV: (list of supported

AT Command SetMC35_ATC_01_V04.00 Page 201 of 238 02.04.20028.28 AT^SPBC Search the first entry in the sorted telephone bookTest commandAT^SPBC=?Resp

AT Command SetMC35_ATC_01_V04.00 Page 202 of 238 02.04.20028.29 AT^SPBG Read entry from active telephone book via sorted indexThis command sorts the

AT Command SetMC35_ATC_01_V04.00 Page 203 of 238 02.04.20028.30 AT^SPBS Steps the selected phonebook alphabeticallyThis command can be used to flick

AT Command SetMC35_ATC_01_V04.00 Page 204 of 238 02.04.20028.31 AT^SPIC Display PIN counterTest commandAT^SPIC=?ResponseOKIf error is related to ME

AT Command SetMC35_ATC_01_V04.00 Page 205 of 238 02.04.2002at^spic^SPIC: 1OKat+cpin=4713+CME ERROR: incorrect passwordat^spic^SPIC: 63OKat+cpin=4714+C

AT Command SetMC35_ATC_01_V04.00 Page 206 of 238 02.04.20028.33 AT^SPLR Read entry from the preferred operators listTest commandAT^SPLR=?ResponseTA

AT Command SetMC35_ATC_01_V04.00 Page 207 of 238 02.04.20028.34 AT^SPLW Write an entry to the preferred operators listTest commandAT^SPLW=?ResponseT

AT Command SetMC35_ATC_01_V04.00 Page 208 of 238 02.04.20028.35 AT^SPWD Change password for a lockTest commandAT^SPWD=?Response^SPWD: (list of suppo

AT Command SetMC35_ATC_01_V04.00 Page 209 of 238 02.04.2002See notes above or contact provider.if <fac> = “SC” then PINif <fac> = “AO”...”

AT Command SetMC35_ATC_01_V04.00 Page 21 of 238 02.04.20022.9 ATDI Mobile originated call to dialable ISDN number <n>Execute commandATDI<n&

AT Command SetMC35_ATC_01_V04.00 Page 210 of 238 02.04.20028.36 AT^SSDA Set Display AvailabilityUse the AT^SSDA command to specify whether your MC3

AT Command SetMC35_ATC_01_V04.00 Page 211 of 238 02.04.20028.37 AT^SSYNC Configure SYNC PinThe ^SSYNC command serves to configure the SYNC pin in th

AT Command SetMC35_ATC_01_V04.00 Page 212 of 238 02.04.2002Table 10: Operating modes of the ME indicated by status LED (if <mode> = 1):LED mode

AT Command SetMC35_ATC_01_V04.00 Page 213 of 238 02.04.20028.38 AT^STCD Display Total Call DurationTest commandAT^STCD=?ResponseOKExecute commandAT^

AT Command SetMC35_ATC_01_V04.00 Page 214 of 238 02.04.20029 APPENDIX9.1 Summary of ERRORS and MessagesThe final result codes +CME ERROR: <err>

AT Command SetMC35_ATC_01_V04.00 Page 215 of 238 02.04.2002Code of <err> Meaning42 Network subset personalization PIN required43 Network subset

AT Command SetMC35_ATC_01_V04.00 Page 216 of 238 02.04.20029.1.3 Summary of CMS ERRORS related to GSM 07.05Code of <err> Meaning1 Unassigned (u

AT Command SetMC35_ATC_01_V04.00 Page 217 of 238 02.04.2002Code of <err> Meaning213 SIM data download error255 Unspecified error cause300 ME fai

AT Command SetMC35_ATC_01_V04.00 Page 218 of 238 02.04.20029.1.4 Summary of Unsolicited Result Codes (URC)A URC is a report message sent from the ME

AT Command SetMC35_ATC_01_V04.00 Page 219 of 238 02.04.2002Message Meaning How to activateURC^SCTM_A: <m>^SCTM_B: <m>Battery (A) or board

AT Command SetMC35_ATC_01_V04.00 Page 22 of 238 02.04.20022.10 ATDL Redial last telephone number usedExecute commandATDL[;]This command redials the

AT Command SetMC35_ATC_01_V04.00 Page 220 of 238 02.04.20029.1.5 Result codesIndication Numeric MeaningOK 0 Command executed, no errors, Wake up after

AT Command SetMC35_ATC_01_V04.00 Page 221 of 238 02.04.200250 GSM cause for Session Management (GSM 04.08 annex I)51 SIEMENS cause for Session Manag

AT Command SetMC35_ATC_01_V04.00 Page 222 of 238 02.04.20029.1.9 GSM release cause for L3 Mobility Management (MM) (AT+CEER)Number DescriptionCauses

AT Command SetMC35_ATC_01_V04.00 Page 223 of 238 02.04.20029.1.10 SIEMENS release cause for L3 Mobility Management (MM) (AT+CEER)Number Description1 N

AT Command SetMC35_ATC_01_V04.00 Page 224 of 238 02.04.2002Number DescriptionService or option not available class49 Quality of service unavailable50

AT Command SetMC35_ATC_01_V04.00 Page 225 of 238 02.04.20029.1.13 SIEMENS release cause for L3 Advice of Charge (AOC) (AT+CEER)Number Description1 SI

AT Command SetMC35_ATC_01_V04.00 Page 226 of 238 02.04.2002Number Description306 Resource Limitation307 Initiating Release308 Unrecognized Linked ID30

AT Command SetMC35_ATC_01_V04.00 Page 227 of 238 02.04.2002Number Description36 Regular PDP context deactivation37 QoS not accepted38 Network failure3

AT Command SetMC35_ATC_01_V04.00 Page 228 of 238 02.04.20029.1.19 SIEMENS release cause for Embedded Netcore (AT+CEER)Number Description0 Regular ca

AT Command SetMC35_ATC_01_V04.00 Page 229 of 238 02.04.20029.2 Summary of PIN requiring AT CommandsThe following table lists all the AT commands that

AT Command SetMC35_ATC_01_V04.00 Page 23 of 238 02.04.20022.11 ATE Enable command echoWrite commandATE[<value>]This setting determines whether

AT Command SetMC35_ATC_01_V04.00 Page 230 of 238 02.04.2002AT command Required PINAT+CR PIN 1AT+CRSM PIN 1AT+CSCA PIN 1AT+CSCB PIN 1AT+CSDH PIN 1AT+CS

AT Command SetMC35_ATC_01_V04.00 Page 231 of 238 02.04.20029.3 AT commands available before entering the SIM PINThe following table summarizes the AT

AT Command SetMC35_ATC_01_V04.00 Page 232 of 238 02.04.2002AT command Test Read Write /ExecuteNoteAT+COPS Phone busy Unknown --- Not useful without PI

AT Command SetMC35_ATC_01_V04.00 Page 233 of 238 02.04.20029.4 Standard GSM service codesThe following GSM command strings can be sent with the ATD c

AT Command SetMC35_ATC_01_V04.00 Page 234 of 238 02.04.2002Abbreviations of codes and responsesCodes / parameters to be sent with ATDBarring services

AT Command SetMC35_ATC_01_V04.00 Page 235 of 238 02.04.20029.4.1 Additional notes on ^SCCFC, ^SCCWA, ^SCLCKThe output of ^SCCFC, ^SCCWA, ^SCLCK depen

AT Command SetMC35_ATC_01_V04.00 Page 236 of 238 02.04.2002^SCCFC: 0,1,1,"+493038649027",145^SCCFC: 0,1,4,"+493038649027",145OKThe

AT Command SetMC35_ATC_01_V04.00 Page 237 of 238 02.04.20029.5 Alphabet tablesThis section provides tables for the special GSM 03.38 alphabet supporte

AT Command SetMC35_ATC_01_V04.00 Page 238 of 238 02.04.2002In the event that an MS receives a code where a symbol is not represented in the above tabl

AT Command SetMC35_ATC_01_V04.00 Page 24 of 238 02.04.20022.13 ATI Display product identification informationExecute commandATIResponseME issues pro

AT Command SetMC35_ATC_01_V04.00 Page 25 of 238 02.04.20022.15 ATL Set monitor speaker loudnessExecute commandATL[val]ResponseOKReferenceV.25terNote

AT Command SetMC35_ATC_01_V04.00 Page 26 of 238 02.04.20022.18 ATQ Set result code presentation modeWrite commandATQ[<n>]ResponseSpecifies whe

AT Command SetMC35_ATC_01_V04.00 Page 27 of 238 02.04.20022.21 ATS3 Write command line termination characterRead commandATS3?Response<n> OKWri

AT Command SetMC35_ATC_01_V04.00 Page 28 of 238 02.04.20022.24 ATS6 Set pause before blind diallingRead commandATS6?Response<n> OKWrite comman

AT Command SetMC35_ATC_01_V04.00 Page 29 of 238 02.04.20022.27 ATS10 Set disconnect delay after indicating the absence of data carrierRead commandAT

AT Command SetMC35_ATC_01_V04.00 Page 3 of 238 02.04.2002Contents0 Version History...

AT Command SetMC35_ATC_01_V04.00 Page 30 of 238 02.04.20022.30 ATV Set result code format modeWrite commandATV[<value>]ResponseThis parameter

AT Command SetMC35_ATC_01_V04.00 Page 31 of 238 02.04.20022.32 ATZ Set all current parameters to user defined profileExecute commandATZ[<value>

AT Command SetMC35_ATC_01_V04.00 Page 32 of 238 02.04.20022.34 AT&D Set circuit Data Terminal Ready (DTR) function modeWrite commandAT&D[<

AT Command SetMC35_ATC_01_V04.00 Page 33 of 238 02.04.20022.36 AT&S Set circuit Data Set Ready (DSR) function modeWrite commandAT&S<value

AT Command SetMC35_ATC_01_V04.00 Page 34 of 238 02.04.20022.37 AT&V Display current configurationExecute commandAT&V[<n>]ResponseTA re

AT Command SetMC35_ATC_01_V04.00 Page 35 of 238 02.04.20022.38 AT&W Store current configuration to user defined profileExecute commandAT&W[&

AT Command SetMC35_ATC_01_V04.00 Page 36 of 238 02.04.20022.39 AT+GCAP Request complete TA capabilities listTest commandAT+GCAP=?ResponseOKParameter

AT Command SetMC35_ATC_01_V04.00 Page 37 of 238 02.04.20022.42 AT+GMR Request TA revision identification of software statusTest commandAT+GMR=?Respo

AT Command SetMC35_ATC_01_V04.00 Page 38 of 238 02.04.20022.44 AT+ILRR Set TE-TA local rate reportingTest commandAT+ILRR=?Response+ILRR: (list of sup

AT Command SetMC35_ATC_01_V04.00 Page 39 of 238 02.04.20022.45 AT+IPR Set fixed local rateTest commandAT+IPR=?Response+IPR: (list of supported auto-

AT Command SetMC35_ATC_01_V04.00 Page 4 of 238 02.04.20022.37 AT&V Display current configuration ...

AT Command SetMC35_ATC_01_V04.00 Page 40 of 238 02.04.2002• Take into account that a delay of 100 ms is required between a response to thelast comman

AT Command SetMC35_ATC_01_V04.00 Page 41 of 238 02.04.20023 AT Commands for FAXThe following commands can be used for FAX transmission.If the ME is a

AT Command SetMC35_ATC_01_V04.00 Page 42 of 238 02.04.20023.2 AT+FBADMUL Error Threshold MultiplierRead commandAT+FBADMUL?This command defines the “

AT Command SetMC35_ATC_01_V04.00 Page 43 of 238 02.04.20023.4 AT+FCIG Query or set the Local polling idTest commandAT+FCIG =?Response(max. length of

AT Command SetMC35_ATC_01_V04.00 Page 44 of 238 02.04.20023.6 AT+FCQ Copy Quality CheckingTest commandAT+FCQ =?This command controls Copy Quality ch

AT Command SetMC35_ATC_01_V04.00 Page 45 of 238 02.04.20023.8 AT+FDCC Query or set capabilitiesTest commandAT+FDCC =?This command allows the connect

AT Command SetMC35_ATC_01_V04.00 Page 46 of 238 02.04.20023.9 AT+FDFFC Data Compression Format ConversionTest commandAT+FDFFC=?This parameter determ

AT Command SetMC35_ATC_01_V04.00 Page 47 of 238 02.04.20023.10 AT+FDIS Query or set session parametersTest commandAT+FDIS =?This command allows the

AT Command SetMC35_ATC_01_V04.00 Page 48 of 238 02.04.20023.11 AT+FDR Begin or continue phase C data receptionExecute commandAT+FDRThe +FDR command

AT Command SetMC35_ATC_01_V04.00 Page 49 of 238 02.04.20023.13 AT+FET End a page or documentWrite commandAT+FET=<ppm>This command indicates th

AT Command SetMC35_ATC_01_V04.00 Page 5 of 238 02.04.20024.14 AT+CGMR Request revision identification of software status ...

AT Command SetMC35_ATC_01_V04.00 Page 50 of 238 02.04.20023.16 AT+FMDL identify Product ModelRead commandAT+FMDL?Send the model identification to th

AT Command SetMC35_ATC_01_V04.00 Page 51 of 238 02.04.20023.19 AT+FPHCTO DTE Phase C Response TimeoutRead commandAT+FPHCTO?The time-out value <to

AT Command SetMC35_ATC_01_V04.00 Page 52 of 238 02.04.20023.22 AT+FRM Receive DataTest commandAT+FRM=?Response(List of supported modulation modes &l

AT Command SetMC35_ATC_01_V04.00 Page 53 of 238 02.04.20023.25 AT+FTM Transmit DataTest commandAT+FTM=?Response(List of supported modulation modes)

AT Command SetMC35_ATC_01_V04.00 Page 54 of 238 02.04.20023.27 AT+FVRFC Vertical resolution format conversionTest commandAT+FVRFC =?This command det

AT Command SetMC35_ATC_01_V04.00 Page 55 of 238 02.04.20024 AT Commands originating from GSM 07.07These AT Commands are according to ETSI (European T

AT Command SetMC35_ATC_01_V04.00 Page 56 of 238 02.04.20024.2 AT+CALA Set alarm time Test commandAT+CALA=?Test command returns supported array ind

AT Command SetMC35_ATC_01_V04.00 Page 57 of 238 02.04.2002Parameter<time> string type value; format is "yy/MM/dd,hh:mm:ss", where char

AT Command SetMC35_ATC_01_V04.00 Page 58 of 238 02.04.2002- For every channel a different <text> parameter can be stored.- <text> will b

AT Command SetMC35_ATC_01_V04.00 Page 59 of 238 02.04.20024.3 AT+CAMM Accumulated call meter maximum (ACMmax) set or queryTest commandAT+CAMM=?Respo

AT Command SetMC35_ATC_01_V04.00 Page 6 of 238 02.04.20025.13 AT+CSCB Select cell broadcast messages ...

AT Command SetMC35_ATC_01_V04.00 Page 60 of 238 02.04.20024.4 AT+CAOC Advice of Charge informationTest commandAT+CAOC=?Response+CAOC: (list of suppo

AT Command SetMC35_ATC_01_V04.00 Page 61 of 238 02.04.20024.5 AT+CBST Select bearer service typeTest commandAT+CBST=?Response+CBST: (list of suppor

AT Command SetMC35_ATC_01_V04.00 Page 62 of 238 02.04.20024.6 AT+CCFC Call forwarding number and conditions controlTest commandAT+CCFC=?Response+CCF

AT Command SetMC35_ATC_01_V04.00 Page 63 of 238 02.04.2002<class> integer or sum of integers each representing a <class> of informa-tion:1

AT Command SetMC35_ATC_01_V04.00 Page 64 of 238 02.04.2002+CCFC: 1,2,"+493012345678",145+CCFC: 1,4,"+493012345678",145OKExample 3T

AT Command SetMC35_ATC_01_V04.00 Page 65 of 238 02.04.20024.7 AT+CCLK Real Time ClockTest commandAT+CCLK=?ResponseOKRead commandAT+CCLK?Response+CCL

AT Command SetMC35_ATC_01_V04.00 Page 66 of 238 02.04.20024.8 AT+CCUG: Closed User GroupTest commandAT+CCUG=?The Test command returns the supported p

AT Command SetMC35_ATC_01_V04.00 Page 67 of 238 02.04.20024.9 AT+CCWA Call waitingTest commandAT+CCWA=?Response+CCWA: (list of supported <n>s)

AT Command SetMC35_ATC_01_V04.00 Page 68 of 238 02.04.20024.10 AT+CEER Extended error reportTest commandAT+CEER=?ResponseOKExecute commandAT+CEERTA

AT Command SetMC35_ATC_01_V04.00 Page 69 of 238 02.04.20024.11 AT+CFUN Set phone functionalityThe AT+CFUN command serves to query or set the level o

AT Command SetMC35_ATC_01_V04.00 Page 7 of 238 02.04.20028.24 AT^SNFO Set audio output (= loudspeaker path) parameter ...

AT Command SetMC35_ATC_01_V04.00 Page 70 of 238 02.04.2002Test commandAT+CFUN=?Response+CFUN: (list of supported <fun>s), (list of supported <

AT Command SetMC35_ATC_01_V04.00 Page 71 of 238 02.04.20026 CYCLIC SLEEP mode:AT+CFUN=6 disconnects any circuit-switched call in prog-ress, but has no

AT Command SetMC35_ATC_01_V04.00 Page 72 of 238 02.04.2002Power saving begins 10 minutes after the last character was sent or receivedover the serial

AT Command SetMC35_ATC_01_V04.00 Page 73 of 238 02.04.20024.12 AT+CGMI Request manufacturer identificationTest commandAT+CGMI=?ResponseOKExecute comm

AT Command SetMC35_ATC_01_V04.00 Page 74 of 238 02.04.20024.15 AT+CGSN Request product serial number identification (IMEI) identicalto GSNTest comma

AT Command SetMC35_ATC_01_V04.00 Page 75 of 238 02.04.20024.17 AT+CHUP Hang up callTest commandAT+CHUP=?ResponseOKExecute commandAT+CHUPCancels all

AT Command SetMC35_ATC_01_V04.00 Page 76 of 238 02.04.20024.19 AT+CIND Indicator controlMC35 offers two ways of displaying status and event reporting

AT Command SetMC35_ATC_01_V04.00 Page 77 of 238 02.04.2002Write commandAT+CIND=[<stat>[,<stat>[,...]]]The write command simply controls th

AT Command SetMC35_ATC_01_V04.00 Page 78 of 238 02.04.20024.20 AT+CLCC List current calls of METest commandAT+CLCC=?ResponseOKParametersExecute comm

AT Command SetMC35_ATC_01_V04.00 Page 79 of 238 02.04.20024.21 AT+CLCK Facility lockTest commandAT+CLCK=?Response+CLCK: (list of supported <fac&g

AT Command SetMC35_ATC_01_V04.00 Page 8 of 238 02.04.20020 Version HistoryThis chapter reports modifications and improvements over previous versions o

AT Command SetMC35_ATC_01_V04.00 Page 80 of 238 02.04.2002Factory set SIM locks“PF” lock Phone to the very First SIM card“PN” Network Personalisation“

AT Command SetMC35_ATC_01_V04.00 Page 81 of 238 02.04.200232 data circuit async64 dedicated packet access128 dedicated PAD accessx combination of some

AT Command SetMC35_ATC_01_V04.00 Page 82 of 238 02.04.2002To lock the mobile to the currently inserted SIM card, first specify a password (=a phone co

AT Command SetMC35_ATC_01_V04.00 Page 83 of 238 02.04.2002After the "PS" lock password was incorrectly entered three times in a row:AT+CPIN?

AT Command SetMC35_ATC_01_V04.00 Page 84 of 238 02.04.2002+CLCK: 1,1 outgoing international voice calls barred+CLCK: 1,2 outgoing international data

AT Command SetMC35_ATC_01_V04.00 Page 85 of 238 02.04.20024.22 AT+CLIP Calling line identification presentationTest commandAT+CLIP=?This command ref

AT Command SetMC35_ATC_01_V04.00 Page 86 of 238 02.04.20024.23 AT+CLIR Calling line identification restriction (by *# sequence)The AT+CLIR command i

AT Command SetMC35_ATC_01_V04.00 Page 87 of 238 02.04.20024.24 AT+CLVL Loudspeaker volume levelTest commandAT+CLVL=?Response+CLVL: (list of supporte

AT Command SetMC35_ATC_01_V04.00 Page 88 of 238 02.04.20024.25 AT+CMER Mobile equipment event reportingTest commandAT+CMER=?Response+CMER: (list of

AT Command SetMC35_ATC_01_V04.00 Page 89 of 238 02.04.2002ReferenceGSM 07.07Unsolicited Result Code:+CIEV: <desc>,<value>NoteOnly the indi

AT Command SetMC35_ATC_01_V04.00 Page 9 of 238 02.04.20028.2 176f AT^MONI Channel numbers are now issued in the form of 4-digitnumbers. Therefore, the

AT Command SetMC35_ATC_01_V04.00 Page 90 of 238 02.04.20024.27 AT+CMUT Mute controlTest commandAT+CMUT=?Response+CMUT: (list of supported <n>s

AT Command SetMC35_ATC_01_V04.00 Page 91 of 238 02.04.20024.28 AT+CMUX Enter multiplex modeMC35 supports Multiplex mode according to the GSM 07.10 M

AT Command SetMC35_ATC_01_V04.00 Page 92 of 238 02.04.2002turns to the AT command mode.3. There are various options to switch from data mode to comma

AT Command SetMC35_ATC_01_V04.00 Page 93 of 238 02.04.2002Command Behaviour on channel 1 Differences on channel 2+3ATS4 1)as described as describedATS

AT Command SetMC35_ATC_01_V04.00 Page 94 of 238 02.04.20024.29 AT+COPN Read operator namesTest commandAT+COPN=?ResponseOKExecute commandAT+COPNTA re

AT Command SetMC35_ATC_01_V04.00 Page 95 of 238 02.04.20024.30 AT+COPS Operator selectionThis command can be used to query the present status of the

AT Command SetMC35_ATC_01_V04.00 Page 96 of 238 02.04.2002ResponseOKIf error is related to ME functionality:+CME ERROR: <err>Parameters<mode&

AT Command SetMC35_ATC_01_V04.00 Page 97 of 238 02.04.20024.31 AT+CPAS Mobile equipment activity statusTest commandAT+CPAS=?Response+CPAS: (list of

AT Command SetMC35_ATC_01_V04.00 Page 98 of 238 02.04.20024.32 AT+CPBR Read current phonebook entriesTest commandAT+CPBR=?ResponseTA returns locatio

AT Command SetMC35_ATC_01_V04.00 Page 99 of 238 02.04.20024.33 AT+CPBS Select phonebook memory storageTest commandAT+CPBS=?Response+CPBS: (list of s