Siemens KF Series Bedienungsanleitung

Publication 0300129-02 Rev. CSIEMENS(S5 Communications)Reference

4SIEMENS (S5 COMMUNICATIONS) REFERENCENote If an odd number of characters is received from the scanner, a Nullcharacter is added to create an even byt

CHAPTER 2: PROGRAMMING5CHAPTER 2: PROGRAMMINGThis chapter of the Siemens (S5 Communications) Reference addressessupported PLC registers and data forma

6SIEMENS (S5 COMMUNICATIONS) REFERENCEThe S5 operands listed above can be addressed as bits, words, or bytes(exception: Timers and Counters are addres

CHAPTER 2: PROGRAMMING7Bit (KM)16 individual bits(One 16-bit location)151413121110987654321Bit Data0LSBMSBThe PLC stores a binary (0 or 1) status for

8SIEMENS (S5 COMMUNICATIONS) REFERENCE16-Bit Signed Integer (Fixed Point, KF)15-Bit Data FieldBit 15(sign bit)Range = -32768 to +32767Bit 016-Bit Sign

CHAPTER 2: PROGRAMMING9This data type displays a 16-bit register location as a 4-digit BinaryCoded Decimal value. The range for the 16 bit BCD selecti

10SIEMENS (S5 COMMUNICATIONS) REFERENCE32-Bit Binary Coded Decimal (KH)16-Bit Location #1Range = 0 to 99,999,99932-Bit BCD16-Bit Location #2(next sequ

CHAPTER 2: PROGRAMMING11Each 16-bit location may contain two ASCII characters (1 byte each).By default, the most significant byte of the base address

12SIEMENS (S5 COMMUNICATIONS) REFERENCEScreen Types and Data FormatsEach SOI Screen type may not support all data formats. The followinglists each scr

CHAPTER 2: PROGRAMMING13Data Display and Entry Screen DefinitionsWhen programming Data Display and Data Entry fields and position-ing them on the SOI

14SIEMENS (S5 COMMUNICATIONS) REFERENCEDisplay ScreenParameter for:16-Bit Unsigned Integer,8-Bit Unsigned Integer,16-Bit Signed Integer &16-Bit BC

CHAPTER 2: PROGRAMMING15Display ScreenParameter for:32-Bit Unsigned Integer &32-Bit BCD Data DescriptionRegister Number The PLC data location oper

16SIEMENS (S5 COMMUNICATIONS) REFERENCEData Entry ScreensThe data format selections available for Data Entry screens are listedbelow and their paramet

CHAPTER 2: PROGRAMMING17Entry ScreenParameter for:16-Bit Unsigned Integer,8-Bit Unsigned Integer,16-Bit Signed Integer &16-Bit BCD Data Descriptio

18SIEMENS (S5 COMMUNICATIONS) REFERENCEEntry ScreenParameter for:ASCII Data DescriptionRegister Number The PLC data location operand and address.Chara

CHAPTER 2: PROGRAMMING19SOI Configuration Data MenuThis section describes the PLC-specific requirements that the SOI-SPSprogramming software supports.

20SIEMENS (S5 COMMUNICATIONS) REFERENCECommunications Port SetupTo define the Communications Port Parameters, select SOI Configura-tion Data from the

CHAPTER 3: TROUBLESHOOTING21CHAPTER 3: TROUBLESHOOTINGThis chapter of the Siemens (S5 Communications) Reference providessolutions to possible operatio

22SIEMENS (S5 COMMUNICATIONS) REFERENCEThe following indicates PLC-oriented problems displayed on the SOIand possible actions to take if necessary.S5

CHAPTER 3: TROUBLESHOOTING23Error Code Description12H, 15H, 16H General Message Structure ErrorAn expected message response from the PLC did not occur

IMPORTANT NOTES1. READ ALL OF THE INFORMATION CONTAINED IN THIS MANUAL BEFORE YOUINSTALL THE PRODUCT.2. The information contained in this manual appli

24SIEMENS (S5 COMMUNICATIONS) REFERENCE

CHAPTER 4: SPECIAL OPERATIONS25CHAPTER 4: SPECIAL OPERATIONSAfter pressing the Function Key (SOI-260) or Mode Key (SOI-120),one of the menu item selec

26SIEMENS (S5 COMMUNICATIONS) REFERENCEAccessing Special Operations in the SOI-260Figure 4.1 shows the Special Operations screens and the keys or sele

CHAPTER 4: SPECIAL OPERATIONS275. If you selected the Data Block operand type, enter the block youwant to display or modify.For all other operand type

28SIEMENS (S5 COMMUNICATIONS) REFERENCEAccessing Special Operations in the SOI-120Figure 4.2 shows the Special Operations screens and the keys or sele

CHAPTER 4: SPECIAL OPERATIONS295. If you selected the Data Block operand type, enter the block youwant to display or modify.For all other operand type

30SIEMENS (S5 COMMUNICATIONS) REFERENCE

INDEX31INDEXSymbols16-bit formatsBCD 8–9Hex 9signed integer 8unsigned integer 832-bit formatsBCD 10Hex 10unsigned integer 9AASCIIdata input 3–

32SIEMENS (S5 COMMUNICATIONS) REFERENCEMMenu, configuration data 19–20OOperandsaccessing/displayingSOI-120 28–29SOI-260 26–27supported 5–6PP-A/D.

LIMITED WARRANTYSpectrum Controls warrants that its products are free from defects in material andworkmanship under normal use and service, as describ

Copyright © 1999 Spectrum Controls, Inc. All rights reserved.Specifications subject to change without notice. Printed in U.S.A.Publication 0300129-0

CHAPTER 1: COMMUNICATIONS ... 1Using the Communications Port ...1Using the SOI-2

CHAPTER 1: COMMUNICATIONS1CHAPTER 1: COMMUNICATIONSThis chapter of the Siemens (S5 Communications) Reference concerns: thecabling needed to use the SO

2SIEMENS (S5 COMMUNICATIONS) REFERENCESOI RS-232Communications PortComputer Serial Port(COM1, COM2)987654321987654321Data InData OutSignal GroundData

CHAPTER 1: COMMUNICATIONS3Adapter45232073225-Pin Male Connector 9-Pin Female ConnectorSignal GroundRXDDTRSignal GroundRXDTXDTXDDTRSOI-to-PLC Communica