Siemens HiPath 3000 Bedienungsanleitung PDF herunterladen (Seite 10)

Concrete deployment scenario of end customer requires additional technical verification!

Please contact [email protected]

Siemens Polycom SpectraLink 8440

Enterprise Communications HiPath 3000 V8

Page 10 of 16

Initiate a call from internal subscriber A2 to the

DUT. Answer the call at the DUT. From the A2

put DUT on hold and verify that A2 receives

Music-on-hold.

From the previous test case retrieve DUT from

hold and verify speech path between the DUT

and A2.

Initiate a call from the DUT to internal subscriber

O1. Answer the call at O1. Put the DUT on hold

and verify that it receives Music-on-hold.

From the previous test case retrieve the DUT

from hold and verify speech path between the

DUT and O1.

Initiate a call from internal subscriber O1 to the

DUT. Answer the call at the DUT. From the DUT

put O1 on hold and verify that it receives Music-

on-hold.

From the previous test case retrieve the DUT

from hold and verify speech path between the

DUT and O1.

Initiate a call from internal subscriber O1 to the

DUT. Answer the call at the DUT. From the DUT

put O1 on hold and verify that it receives Music-

on-hold.

From the previous test case retrieve the DUT

from hold and verify speech path between the

DUT and O1.

Initiate a call from the DUT to internal subscriber

A2. Answer the call and initiate consultation at

A2. Verify that the DUT receives Music-on-hold.

From the previous test case return from

consultation and verify speech path between the

DUT and A2.

Initiate a call from internal subscriber A2 to the

DUT. Answer the call and initiate consultation

at the DUT. Verify that A2 receives Music-on-

hold while the DUT receives dial tone.

From the previous test case dial O1 at the DUT.

Answer the call at O1. Verify that the DUT can

toggle between A2 and O1.

From the previous test case initiate a

supervised transfer at the DUT so that A2 and

O1 are connected. Verify that A2 and O1 have

speech path, the displays are correct, and that

the DUT returns to idle state.

OK*

Displays are updated but DUT

only shows number, not name

(HiPath 3000 limitation)

Initiate a supervised transfer at the O1 so that

the DUT and O2 are connected. Verify that the

DUT and O2 have speech path, the displays are

correct, and that the DUT returns to idle state.

OK*

Displays are updated but DUT

only shows number, not name

(HiPath 3000 limitation)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens HiPath 3000 Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mobiltelefone Siemens HiPath 3000