Siemens S45 Bedienungsanleitung PDF herunterladen

TNS010 TCP/IP Stack Chip

Data Sheet and User Manual

Rev. 010-21-06-2003

1 2 3 4 5 6 ... 14 15

TNS010 TCP/IP Stack Chip Data Sheet and User Manual Rev. 010-2

Seite 2

Bypass AT command to modem Just type any AT commands then TNS010 will bypass to modem. Command: at<parameter><CR> Response:

Seite 3

Set up GPRS/modem interfacing baud rate Command: at+isetbaud=<baud rate><CR> Response: +I_OK Baud rate value list: 5

Seite 4

TNS010 GPRS Development board (DEV-010-A) schematic 12

Seite 5

GPRS phone data link connector details Siemens S45 connector’s pin out 1. Gnd 2. – 3. Charge 4. – 5. Tx (out from ph

Quick Start Guide GPRS phone or GPRS module ? pricing is our prime concern and is the reason why we opt to go with GPRS phones. By comparing to

Seite 7

15  at <ENTER> /* GPRS phone response testing */  OK  at+isetd=xxx /* xxx = ISP di

Checkout: http://www.tcpipchip.com for details and updates 2

Seite 9

TNS 010 TCP/IP stack Chip Description TNS010 TCP/IP stack chip is a complete single turnkey product that enables the Internet connection. Not on

Electrical Characteristics Symbol Description Min Type Max Unit VIL Input Low Voltage -0.5 0.9 V. VIH Input High Vol

TCP/IP Software Specifications Maximum at+i command length (include at+i itself) 256 bytes Maximum TCP segment size 512 bytes Serial RX buffer le

Summary of basic Commands • 19,200 BPS command baud rate (MCU  TCP/IP Chip) • 1 ,200-57,600 BPS GPRS/modem baud rate. ( TCP/IP Chip  GPRS

Set up a dialing number Command: at+isetd=< ISP dialing number><CR> Response: +I_OK Example: at+isetd=*99***1#<CR>

Display PPP user name Command: at+isetuser=?<CR> Response: <USER NAME> +I_OK Example: at+isetuser=? <CR> Dav

Example: at+ihttp://www.google.com /l<CR> +I_OK Content-Length:2998 <html><head><meta http-equiv="conte

Weitere Dokumente für Mobiltelefone Siemens S45

Siemens S45 Spezifikationen (122 Seiten)

Keine Kommentare