Siemens HICOM Hicom 300 Bedienungsanleitung

1 MMiiccrroossoofftt EExxcchhaannggee SSeerrvveerr 22000077 UUnniiffiieedd MMeessssaaggiinngg PPBBXX CCoonnffiigguurraattiioonn NNoott

10 5 Dial Auto Attendant (AA). Dial the extension for the AA and confirm the AA answers the call. P 6 Call Transfer by Directory Search. 6a

11 extension. Confirm the FAX is received in the user’s inbox. 10 Setup TLS between gateway/IP-PBX and Exchange UM. Replace this italicized text

12 6.1. Detailed Description of Limitations Failure Point Phone type (if phone-specific) Call scenarios(s) associated with failure point List

13 7. Troubleshooting 7.1. Important Debugging Tools • Ethereal/Wireshark – Used to view and analyze the network captures provided by the Dialogic

14 Appendix 1. Dial Pilot Number and Mailbox Login • Dial the pilot number of the UM server from an extension that is NOT enabled for UM. • Confir

15 b. From an External Phone • From an external phone, dial the extension for a UM-enabled user and leave a voicemail message. • Confirm the voice

16 • Note: Even though some keys are associated with three or four numbers, for each letter, each key only needs to be pressed once regardless of th

17 • Once it is received in the user’s inbox, use OWA’s Play-On-Phone to dial an internal extension. • Confirm the voicemail is delivered to the co

18 9. FAX • Use the Management Console or the Management Shell to FAX-enable a user. • Management Console: • Double click on a user’s mailbox and

19 12. Message Waiting Indicator (MWI) • Although Exchange 2007 UM does not natively support MWI, Geomant has created a 3rd party solution - MWI2007

2 Content This document describes the configuration required to setup Siemens Hicom 300 and Dialogic® 1000 Media Gateway Series (DMG1008DNI) using di

3 1. Components Information 1.1. PBX or IP-PBX PBX Vendor Siemens Model Hicom 300 Software Version 9006.4SMR4 Telephony Signaling Digital set em

4 3. Summary and Limitations A check in this box indicates the UM feature set is fully functional when using the PBX/gateway in question. 4. Gat

5 5. PBX Setup Notes The basic steps of setting up the PBX for use with this gateway and Exchange UM are as follows: • Setting up each gateway stati

6 8. The KY09 field needs to be set to MB. This is part of the requirement for station sets that will need to perform message waiting actions on oth

7 Personal ID/Share: | Call Pickup Grp: COS Changeover ID: | Hunt Grp/Type: 500/VCE Accou

8 5.3. Setting Up Subscriber Station Sets There is no PBX-side programming for setting up the subscriber station sets. All the forwarding of the sub

9 6. Exchange 2007 UM Validation Test Matrix The following table contains a set of tests for assessing the functionality of the UM core feature set.