Siemens HiPath 8000 Bedienungsanleitung PDF herunterladen (Seite 49)

administration.fm

A31003-O1010-M100-10-76A9, 13/06/2008

HiPath 8000 - OpenStage Family, Administration Manual

3-7

Administration

LAN Settings

3.2.2 VLAN

VLAN (Virtual Local Area Network) is a technology that allows network administrators to parti-

tion one physical network into a set of virtual networks (or broadcast domains).

Physically partitioning the LAN into separate VLANs allows a network administrator to build a

more robust network infrastructure. A good example is a separation of the data and voice net-

works into data and voice VLANs. This isolates the two networks and helps shield the endpoints

within the voice network from disturbances in the data network and vice versa.

In a layer 1 VLAN, the ports of VLAN-aware switch are assigned to a VLAN statically. The

switch only forwards traffic to a particular port if that port is a member of the VLAN that the traffic

is allocated to. Any device connected to a VLAN-assigned port is automatically a member of

this VLAN, without being a VLAN aware device itself. If two or more network clients are con-

nected to one port, they cannot be assigned to different VLANs. When a network client is mov-

ing from one switch to another, the switches’ ports have to be updated accordingly by hand.

With a layer 2 VLAN, the assignment of VLANs to network clients is realized by the MAC ad-

dresses of the network devices. In some environments, the mapping of VLANs and MAC ad-

dresses can be stored and managed by a central database. Alternatively, the VLAN ID, which

defines the VLAN whereof the device is a member, can be assigned directly to the device, e. g.

by DHCP. The task of determining the VLAN an Ethernet packet is belonging to is carried out

by VLAN tags within each Ethernet frame. As the MAC addresses are (more or less) wired to

the devices, mobility does not require any administrator action, as opposed to layer 1 VLAN. It

is possible to assign one device, i.e. one MAC address, to different VLANs.

It is important that every switch connected to a PC is VLAN-capable. This is also true for the

integrated switch of the OpenStage. The phone must be configured as a VLAN aware endpoint

if the phone itself is a member of the voice VLAN, and the PC connected to the phone’s PC port

is a member of the data VLAN.

The VLAN ID can be configured automatically by DHCP or manually.

The implementation of a voice network based on VLANs requires the network infra-

structure (the switch fabric) to support VLANs.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 259 260

Keine Kommentare

Siemens HiPath 8000 Bedienungsanleitung Seite 49