Siemens SPARC ENTERPRISE M8000 Bedienungsanleitung PDF herunterladen (Seite 16)

8 SPARC Enterprise M8000/M9000 Servers Product Notes for XCP Version 1072 • September 2008

Information about Software

This section describes the special instructions and the issues about the SPARC

Enterprise M8000/M9000 servers software.

■ XCP Issues and Workarounds

■ Solaris OS Issues and Workarounds

■ Software Documentation Updates

■ Identifying Degraded Memory in a System

■ Identifying Different Memory Sizes in a System Board

■ Identifying Permanent Memory in a Target Board

■ CPU Upgrade

XCP Issues and Workarounds

TABLE 3 lists known XCP issues and possible workarounds.

TABLE 3 XCP Issues and Workarounds

ID Description Workaround

RTIF1-

070418-009

While XSCF is running, a process may go

down, a watchdog timeout may occur, or a

hang-up may occur. After this, XSCF may

reset.

Check that XSCF is started. to be translated. If

not started, stop all the domains and then

execute the system power off/on (AC

OFF/ON). To turn on the system power that

you turned off, wait at least 30 seconds before

power-on.

RTIF1-

070528-002

While XSCF is running, watchdog timeout

may occur and XSCF may reboot.

Check that XSCF is started. If not started, stop

all the domains and then execute the system

power off/on (AC OFF/ON). To turn on the

system power that you turned off, wait at least

30 seconds before power-on.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 49 50

Keine Kommentare

Siemens SPARC ENTERPRISE M8000 Bedienungsanleitung Seite 16