Siemens AFI5100 Bedienungsanleitung

SiPass integrated AFI5100 Installation manual Fire Safety & Security ProductsSiemens Building Technologies

Input Point Module (AFI5100) 1.8 LEDs The following table describes the operation of the LEDs located on the AFI5100 : LED Brief Description POWER

Input Point Module (AFI5100) 1.9 Recommended Cable Specifications The following table outlines the cable recommended for connection of an inte-grate

Input Point Module (AFI5100) 12 Siemens Building Technologies A24205-A335-B245.docFire Safety & Security Products 02.2005

Issued by Siemens Building Technologies Fire & Security Products GmbH & Co. oHG D-76181 Karlsruhe www.sbt.siemens.com © 2005 Copyright by

Liefermöglichkeiten und technische Änderungen vorbehalten. Data and design subject to change without notice. Supply subject to availability. © 2005 Co

Contents 1 Input Point Module (AFI5100) ...5 1.1 Product Description...

4 Siemens Building Technologies Fire & Security Products 02.2005

Input Point Module (AFI5100) 1 Input Point Module (AFI5100) Fig. 1 Input Point Module 1.1 Product Description The AFI5100 is an Input Point Modu

Input Point Module (AFI5100) 1.4 Expected Installation Time 30 minutes 1.5 Mounting Instructions 1. Remove the AFI5100 from its carton and discard

Input Point Module (AFI5100) 4. Connect the next device in the Fire Override sequence to the FIRE OVER-RIDE OUTPUT port if required. 5. Connect the

Input Point Module (AFI5100) The following diagram displays the location of the ports on the AFI5100 : FOR OUTNc C No OUT 1Nc C No OUT 2Nc C No

Input Point Module (AFI5100) 1.7 Links and Jumpers The following table outlines the link settings for the AFI5100 : Link Description Value LK1, LK