Siemens 5890 Betriebsanweisung PDF herunterladen (Seite 54)

SIEMENS 5890 DSL Router

User’s Guide

Chapter 5 Advanced Setup

QoS

SIEMENS 48

• Priority. Priority determines the order in which packets will be processed by the router.

• Weight. Weight determines the amount of bandwidth to be allocated to a given application.

The router supports four priority levels; High, Medium, Normal and Low. A weight value can be assigned to

each of these priority levels from a minimum of 1 to a maximum of 255.

To configure QoS:

1. Click QoS in the left navigation pane of the Router Information page. This displays the QoS Configuration

page. This page shows the current settings as well as provides a means to change the current settings.

2. Select one of the following from QoS Status to enable or disable QoS:

• On: QoS will forward packets and set diffserv marking based on user defined mapping rules and

enabled QoS policies.

• Off: QoS will forward packets based on pre-defined mapping rules and enabled QoS policies.

3. To enable or disable marking of the Differentiated Services field of the IP header, select one of the

following from DiffServ Status:

• On: QoS will mark the DiffServ field according to the QoS Policies and pre-defined behavior.

• Off: DiffServ is not marked; this is DiffServ pass through.

4. Assign weight values to four different priorities. This can be a number between 1 and 255.

5. Click Apply.

6. Configure QoS policies

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 101 102

Keine Kommentare

Siemens 5890 Betriebsanweisung Seite 54