Siemens S7-300F-2 Bedienungsanleitung PDF herunterladen (Seite 20)

Industry Automation and Drive Technologies - SCE

TIA Training Document

Page 20 of 65

Module E11

Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and

RF180C

5.3 Assigning a Device Name

17. First, highlight the module RF180C and then select, under the menu "Destination system“ and

under Ethernet Assign device name.

Note

A prerequisite for this is that the die PG/PC interface is set to TCP/IP and the PC’s network card is

configured correctly. For example, IP address 192.168.0.99, subnet 255.255.255.0 and router

address -.-.-.- (refer to Module E02)

18. Highlight the SIMATIC RFID module and then click on the button “Assign name“. Then close the

window.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 64 65

Keine Kommentare

Siemens S7-300F-2 Bedienungsanleitung Seite 20