Siemens TC35 Bedienungsanleitung PDF herunterladen (Seite 2)

01-09-09

Written by Darren Bagshaw v1.1 2

4. Configuring the software and testing the GSM SIM cards.

4.1.load the PowerLink software (ensure the software is v5 or above).

4.2.Click Config -> Type of Instrument, select “PQA plus” and “OK”

4.3.Select Config -> Port

4.4.Select the port on which the modem has been connected (in most cases this is Com 1 or 2)

4.5.Select the baud rate 9600.

4.6.Click “Enable Modem”

4.7.Under “Local modem” select “GSM modem” (leave the PIN blank for the moment)

4.8.Under “Target Modem” select “GSM modem” (leave the PIN blank for the moment)

4.9.In the “Target tel. number” box, for testing purposes type in the number for a nearby

telephone or mobile phone (later, this will be changed to the number of the Target SIM chip)

and click OK.

1 2 3 4 5

Keine Kommentare

Siemens TC35 Bedienungsanleitung Seite 2