Siemens CU230P-2 Spezifikationen PDF herunterladen (Seite 2)

Warranty, liability and support

Commissioning of the Control Unit CU230P-2 DP with PROFIBUS ID-No: 35934076

Version 1 Issue May 2009 2/33

PDF_Commissioning_of_CU230P_2_DP_with Profibus_en_V1.doc

Note

The Application Examples are not binding and do not claim to be

complete regarding the circuits shown, equipping and any eventuality.

The Application Examples do not represent customer-specific solutions.

They are only intended to pro-vide support for typical applications. You

are responsible in ensuring that the de-scribed products are correctly

used. These Application Examples do not relieve you of the responsibility

in safely and professionally using, installing, operating and servicing

equipment. When using these Application Examples, you recognize that

Siemens cannot be made liable for any damage/claims beyond the

liability clause described. We reserve the right to make changes to these

Application Examples at any time without prior notice. If there are any

deviations between the recommendations provided in these Application

Examples and other Siemens publications - e.g. Catalogs - then the

contents of the other documents have priority.

Warranty, liability and support

We do not accept any liability for the information contained in this

document.

Any claims against us - based on whatever legal reason - resulting from the

use of the examples, information, programs, engineering and performance

data etc., described in this Application Examples shall be excluded. Such

an exclusion shall not apply in the case of mandatory liability, e.g. under

the German Product Liability Act (“Produkthaftungsgesetz”), in case of

intent, gross negligence, or injury of life, body or health, guarantee for the

quality of a product, fraudulent concealment of a deficiency or breach of a

condition which goes to the root of the contract (“wesentliche

Vertragspflichten”). However, claims arising from a breach of a condition

which goes to the root of the contract shall be limited to the foreseeable

damage which is intrinsic to the contract, unless caused by intent or gross

negligence or based on mandatory liability for injury of life, body or health

The above provisions does not imply a change in the burden of proof to

your detriment.

copy these Application Examples or excerpts of them without first

having prior authorization from Siemens A&D in writing.

If you have any recommendations relating to this document then please

send them to us at the following e-mail address:

1 2 3 4 5 6 7 ... 32 33

Keine Kommentare

Siemens CU230P-2 Spezifikationen Seite 2