Siemens SE105 Spezifikationen PDF herunterladen (Seite 27)

Configuring the local network

Gigaset Router / de / A31008-E105-B100-2-19 / configure_tcpip.fm / 05.06.2003

Synchronising the TCP/IP settings with the Gigaset Router

You have now configured your PC so that it is ready to be connected to the Gigaset

Router. You now have to release the old TCP/IP settings and update them with the

settings of your Gigaset Router.

◆ Click on Start – Run.

◆ Enter WINIPCFG and click on OK.

There may be a slight delay before the IP configuration appears.

◆ Select your network adapter from the selection list.

◆ Click on Release and then Renew.

If the router's default IP address (192.168.2.1) was not changed, the IP address

should now read 192.168.2.x (with x being a number between 2 and 254). The

Subnet mask must always be 255.255.255.0 and the Default Gateway must have

the router's IP address (192.168. 2.1). These values confirm that your Gigaset Router

is working.

◆ Click on OK to close the IP configuration window.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 114 115

Keine Kommentare

Siemens SE105 Spezifikationen Seite 27