Siemens Server Bedienungsanleitung

Water Technologies ChemWeb Server Installation, Operation & Maintenance Manual

Description of ChemWeb Server 4 COM 1 - RS232 null modem This RS232 port is used for modem parameterization and null modem operation without having t

Overview of ChemWeb Server 5 CompactFlash slot (CF) The CompactFlash slot is used as memory for programs and data and can operate commercial CompactFl

Connecting more than one ChemWeb Server 6 RS485 bus system The serial RS485 bus is designed as balanced two-wire bus line according to EIA RS485 (DIN

Connecting more than one ChemWeb Server 7 For these resistors, the followings values are recommended: Rt 150 Ohm +/- 2 % min. 0.25 W Ru 390 Ohm

Setting the IP address of the ChemWeb Server 8 Initialization of the ChemWeb Server after switching on the power supply or after a reset may take

Setting the IP address of the ChemWeb Server 9 The network connection can be controlled and adapted under “Control Panel” ==> “Network and Internet

Setting the IP address of the ChemWeb Server 10 A fixed IP address and network mask must always be assigned. Other settings should not be changed.

Setting the IP address of the ChemWeb Server 11 In this window all network connections can be controlled and adapted. Select the menu item “Create

Setting the IP address of the ChemWeb Server 12 Select “Connect using a dial-up modem” and click “Next”. Select the installed modem and click “Nex

Setting the IP address of the ChemWeb Server 13 Select whether this connection is to be available for all users of this computer or only for the use

2

Setting the IP address of the ChemWeb Server 14 Null modem connection via serial interface Via the integrated RS232 interface “COM1 Null modem” of the

Setting the IP address of the ChemWeb Server 15 Click the box “Don’t detect my modem; I will select it from a list”, and click “Next”. Select “Sta

Setting the IP address of the ChemWeb Server 16 Select the “Modem” you have just installed and select “Properties“. In the selection menu, the maxim

Setting the IP address of the ChemWeb Server 17 Select “Set up an advanced connection” and click “Next”. Select “Connect directly to another com

Setting the IP address of the ChemWeb Server 18 Select the interface used for the null modem connection and confirm your choice by clicking “Next”.

Setting the IP address of the ChemWeb Server 19 If this window appears, click “Properties”, as further settings have to be made. In this window,

Setting the IP address of the ChemWeb Server 20 Now type the correct user name and the matching password in the entry boxes. Test the created connec

Setting the IP address of the ChemWeb Server 21 Start menu item “Find” in the “CHIP” menu. The program then locates all ChemWeb Servers connected to t

Setting the IP address of the ChemWeb Server 22 Setting the IP address of the ChemWeb Server with DHCP The network administrator must reserve a fixed

Startup 23 Before startup, a connection to the ChemWeb Server must always be established! This can be any connection (see chapter 3). When starting

Table of Contents WARNING NOTIFICATIONS...

Server Setup 24 Bus scan Under this menu item all bus users connected are located automatically, and the corresponding results are displayed. Click “S

Server Setup 25 Mail configuration Under this menu item, the ChemWeb Server is supplied with data from your provider for sending e-mails. Type the dat

Server Setup 26 Event configuration Under this menu item you can define results, which initiate an immediate information e-mail, for each bus user.

Server Setup 27 The entry box “Release value” specifies the value at which the event initiates the information e-mail. By clicking the selection bo

Server Setup 28 Relay 2 ON / Relay 2 OFF: By clicking this command, relay 2 can be switched on or off. The status of the relay is not stored in the ca

Server Setup 29 After changing the FTP or PPP password the ChemWeb Server must be restarted to activate the new login. Name configuration Webs

Server Setup 30 This menu item shows a separate page listing all network configuration data of the ChemWeb Server. Disconnect the power supply of the

Operation and Data Access 31 Operation via Web Browser To handle and display the data, a Java-capable Internet Browser (e.g. Internet explorer) must b

Operation and Data Access 32 Online values The submenus of “Online values” display all relevant measured values, status messages, faults and other inf

Operation and Data Access 33 Trend The submenus of “Trend” show all measured values of the respective device as daily chart. One group always contains

4 ChemWeb Server Warranty USFilter Stranco warrants equipment of its manufacture and bearing its trademark to be free of defects in workmanship and

Operation and Data Access 34 Backing up log files The old data is located in the compact flash card. If you have a standard card reader for the PC, y

Operation and Data Access 35 Data access to CompactFlash card with card scanner The CF card must also include the firmware of the ChemWeb Server. Th

Technical data 36 Dimensions 3.9” x 4.3” x 2.9” (H x W x D), without CF card / plug Weight approx. 1 LB Installation top hat rail DIN EN 500 22 A

Appendix 37 Accessories and part numbers ChemWeb Server serial 5885557 ChemWeb Server with analog modem 56k 6485560 ChemWeb Server with ISDN modem

Appendix 38 Tested Web Browser The ChemWeb Server was tested successfully with the following Web browsers: - Microsoft Internet Explorer 6.0 SP1 wi

Appendix 39 Ethernet address The Ethernet address is the invariable, physical address of an Ethernet network component. Firewall Firewall describes n

Appendix 40 IP address The IP address is a 32-bit number, which identifies each network user in the Internet or Intranet unambiguously. It consists of

For further information please contact: Siemens Water Technologies P.O. Box 389 Bradley, IL. 60915 U.S.A 866.766.5987 phone 815.932.1760 fax

WARNING NOTIFICATIONS i NOTE: PLEASE PAY PARTICULAR ATTENTION TO THE WARNING NOTICES FOUND ON THE FOLLOWING PAGES AND THROUGHOUT THIS MANUAL. DISC

Overview of ChemWeb Server 1 The ChemWeb Server is used for central recording, monitoring and logging of the process data in potable and swimming pool

Description of ChemWeb Server 2 The ChemWeb Server is a compact standalone PC which is fitted with an integrated analog, ISDN modem in addition to th

Overview of ChemWeb Server 3 Ext. Reset If the reset input is connected more than 3 seconds to ground GND or the RESET key is pressed at least 3 secon