Siemens SIMATIC PC Adapter TS Adapter Bedienungsanleitung PDF herunterladen (Seite 14)

Manual – MOVITOOLS® - Connection to SIMATIC S7 via MPI

Integration into an existing STEP7 project

Configuration of SIMATIC S7

3.5 Integration into an existing STEP7 project

Only a few steps are required to integrate the blocks into an existing STEP7 project:

• Dearchive and open the STEP7 archive VXXX_DP.ZIP or VXXX_DPV1.zip in the

SIMATIC Manager via [File] / [Archive].

• Assign a different DB or FC number (highlight block, press right mouse button, menu

item [Rename]) to the FC_Movitools_VX.XX, Movitools_HDB_VX.XX and

Movitools_CDB_VX.X blocks.

• Copy the blocks to your STEP7 project. To do this, select the blocks (→ figure below)

and drag and drop them into your STEP7 project.

• Now add the

FC_MoviTools

function request to your OB1 (e.g. call FC100) in accor-

dance with Sec. "The FC_MoviTools function."

• Define the list of inverters that are going to have their parameters set using

MOVITOOLS

in Movitools_HDB_VX.XX (→ Sec. "Structure of the hardware data

block")

• Upload your STEP7 project expanded by MOVITOOLS

to the PLC.

Please note:

• The "X" characters in the name are placeholders for the version number (e.g.:

V410_DP.ZIP = Step7 archive with version number 4.10).

• Please note the limitations when assigning the data block numbers (→ section

"Copying data blocks").

06466AXX

Figure 6: Copy the blocks to an existing STEP7 project

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Keine Kommentare

Siemens SIMATIC PC Adapter TS Adapter Bedienungsanleitung Seite 14