Siemens TC35 Terminal Spezifikationen PDF herunterladen (Seite 108)

100

101

TC35i AT Command Set

4.12 AT^STPB

obil

TC35i_ATC_V02.07 Page 108 of 439 1/30/04

Confidential / Released

Parameter Description

(&F)

The parity bit will not be transmitted over the air and will be replaced with 0.

This mode is the default setting if 7E1 or 7O1 is activated with

AT+ICF.

1 In a data connection 8 bits will be transmitted, including the parity bit, i.e. the

parity bit will be properly transmitted over the air. The setting shall be used if

problems are encountered when TC35i is running in the default 7E1 or 7O1

mode enabled with

AT+ICF. In this case, AT^STPB=1 shall be set in addition

to the 7E1 or 7O1 settings selected with

AT+ICF.

<n>

(num)(&W)

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 438 439

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens TC35 Terminal Spezifikationen Seite 108

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Siemens TC35 Terminal