Siemens Codelock K44 Duo Bedienungsanleitung PDF herunterladen (Seite 11)

K44 Duo Installation & User manual 11

ENG

Choose password

The ﬁrst thing to do before you can start program-

ming is to choose a password.

Press and hold the SW1 button on the code

lock’s circuit board. Both LEDs are lit.

Enter a 6-digit password.

Make a note of the new password in the chart at

the back of the manual.

Change password

Press B and enter the current password.

Enter A27.

Enter the new password. A warning tone is

heard.

Enter the new password once again.

Press B to leave programming mode.

Make a note of the new password in the chart at

the back of the manual.

Programming commands

Always press B and the password before any com-

mands are used.

Leaving the programming mode can be done by

pressing B.

1�

2�

3�

1�

2�

3�

4�

5�

6�

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 183 184

Keine Kommentare

Siemens Codelock K44 Duo Bedienungsanleitung Seite 11