Siemens B4 Bedienungsanleitung PDF herunterladen (Seite 15)

Automation– and Drive Technology- SCE

11. Values should be modified in a data block. It is not adequate to modify them in the field Initial

value . This is only possible, when one switches to the Data View under View ( ® View ® Data

View).

12. Now a new value can be entered in the field Actual value and saved onto the hard drive with

as well as downloaded into the CPU with ( ® Actual value ® ® ).

T I A Training document Page 15 of 18 Module B4

Last revision: 02/2002 Data blocks

Forward Notes Generating data blocks

1 2 ... 10 11 12 13 14 15 16 17 18

Keine Kommentare

Siemens B4 Bedienungsanleitung Seite 15