Siemens PC 670 Wartungshandbuch PDF herunterladen (Seite 36)

Connecting and Switching On the Panel PC 670/870 Release 11/02

2–14 SIMATIC Panel PC 670/870 Start-Up Instructions

2.6.3 Windows 2000

When a Panel PC 670/870 is started up for the first time, the system may

request entry of the appropriate license number during the operating system

boot routine. After entering the license number, enter a name for the computer

so that it can be identified within a network. It is advisable to enter an

administrator password under Microsoft Windows 2000.

Notice

If external PS/2 and USB keyboards are used at the same time, it is possible

that the keyboard LEDs are not updated correctly.

Auto Logon

If Auto Logon should be activated, set the following.

Log on as system administrator:

1. Select Start

→

Settings

→

Control Panel

→

Users and Passwords:

2. Deactivate the checkbox Users and enter user name and password for the

computer.

3. Apply the settings and enter the password.

Special features

The Panel PC 670/870 is shipped with BIOS setting LEGACY SUPPORT

DISABLED. That means the full functional range of a USB keyboard is not

available during the initial boot sequence (before Windows is started). There

are no restrictions for using a USB keyboard to make changes in the BIOS

Setup. When using an operating panel with touchscreen front, changes can

only be made to the BIOS using an externally connected USB or PS/2

keyboard.

The USB Legacy Support is preset to DISABLED in the BIOS Setup under

menu item Hardware.

Service Pack

The following Service Pack is required:

• Windows 2000: Service Pack 2 or higher

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 97 98

Keine Kommentare

Siemens PC 670 Wartungshandbuch Seite 36