Siemens MC35 Bedienungsanleitung PDF herunterladen (Seite 22)

AT Command Set

MC35_ATC_01_V04.00 Page 22 of 238 02.04.2002

2.10 ATDL Redial last telephone number used

Execute command

ATDL[;]

This command redials the last voice and data call number used in the ATD com-

mand.

• To redial the last data call number simply enter ATDL

• To redial the last voice call number type ATDL;

Note: The command may be aborted generally by receiving a character during

execution. This command cannot be aborted in some connection setup

states, such as handshaking.

Response

If there is no last number or number is not valid:

+CME ERROR

If no dialtone (parameter setting ATX2 or ATX4):

NO DIALTONE

If busy (parameter setting ATX3 or ATX4):

BUSY

If a connection cannot be set up:

NO CARRIER

If successfully connected and non-voice call:

CONNECT<text> TA switches to data state.

Note: <text> output only if +ATX parameter setting with value > 0.

When TA returns to command mode after call release:

If successfully connected and voice call:

Parameter

<;> voice call

Reference

V.25ter

Note

In case of voice calls “;” is necessary.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 237 238

Keine Kommentare

Siemens MC35 Bedienungsanleitung Seite 22