Siemens CA 343 Series Bedienungsanleitung PDF herunterladen (Seite 10)

Manual – MOVITOOLS® - Connection to SIMATIC S7 via Ethernet

Setting up a TCP/IP connection with STEP7

PLC Configuration in STEP7

6. Select any connection ID in the "Local Endpoint" group from the dropdown menu "ID

(hex)."

Enter the name of the new TCP/IP connection (e. g. TCP-Movilink-1) in the "Name"

field.

7. Select the tab "Addresses."

8. Enter the value "300" as local port address in the "PORT (dec)" entry field of the "Lo-

cal" group; no entry is required for the "Partner" group.

Note the following:

• The check boxes "Active connection establishment" and "Use FTP protocol" may

not be activated.

• If you have configured several Ethernet CP components in the same system rack,

you will have to assign the connection of the correct Ethernet CP component using

the "Route" button.

11166AXX

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Keine Kommentare

Siemens CA 343 Series Bedienungsanleitung Seite 10