Siemens ET1 Series Technical Information PDF herunterladen (Seite 17)

INSTALLATION

2-9

Trunk Bank Sel: Select the TDM bank to transport ETx traffic. Only

one out of two banks (4 * 32 time-slot bus) can be

chosen for each ETx module.

Object name Available

settings

Description

0: PCM30

Default E1 settings for CAS(PCM30) mode

1: PCM30C Default E1 settings for CAS(PCM30) mode with

CRC option enabled

2: PCM31

Default E1 settings for CCS(PCM31) mode

Load Profile

3: PCM31C

Default E1 settings for CCS(PCM31) mode with

CRC option enabled

Initial

System

Are you sure?

Reinitialize system to factory default (CCS mode). All

user defined parameters will be changed.

[ENTER]=’Yes’, [EXIT]=’No’

Lock

Lock front panel to prevent from unauthorized

changes on configuration

Front Lock

Unlock

Unlock front panel. Password is required to release

the lock.

Input : ----

Step 1: Input administrative password for

authentication

Edit : ----

Step 2: Enter new password

Password Edit

Verify : ----

Step 3: Re-enter new password again for verification

Master

Set the module as the clock source of MARS 9000

system

Clk Source

Mode

Slave Follow timing clock from TDM bus

E1 Ch1

Recover clock from 1

E1 port

E1 Ch2

Recover clock from 2

E1 port

System Bus

Follow timing clock from TDM bus

Int

Generate clock signal

Clk Source

Sel

Ext

Follow clock signal from EXT CLK interface

Ch 1,2,3,4

Select bank 1 (TDM bus 1~4) as transport medium.Trunk Bank

Sel

Ch 5,6,7,8

Select bank 2 (TDM bus 5~8) as transport medium.

E1 Connect

Sel

Refer to instruction above

Table 2-3 SYSTEM MANAGE group function

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 25 26

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens ET1 Series Technical Information Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Siemens ET1 Series