Siemens NAN 67 Series Bedienungsanleitung PDF herunterladen (Seite 45)

Appendix B: CRC-16 Calculation

02/13 Modbus® RTU Serial Communications User Manual 39

Address

(hex)

(decimal)

Parameter Name Access Notes

0062 40099 Deadband R/W Floating Point

0064 40101 Reset #2 R/W Floating Point in Repeats/Minute or

Minutes/Repeat.

For loop #2 this cell is

UDC3300 Reset #4 or UDC3500 Reset #6

0066 40103 Rate #2 R/W Floating Point in Minutes

For loop #2 this cell is UDC3300 rate #4 or

UDC3500 rate #6

0068 40105 Cycle Time #2 R/W Floating Point in Seconds.

Read-only UDC2300, UDC3300.

For loop #2 this cell is UDC3300 Cycle Time #4

or UDC3500 Cycle Time #6

006A 40107 LSP #1 R/W Floating Point in Engineering Units.

006C 40109 LSP #2 R/W Floating Point in Engineering Units.

006E 40111 Alarm #2 SP #1 R/W Floating Point in Engineering Units. Note 2

0070 40113 Alarm #2 SP #2 R/W Floating Point in Engineering Units. Note 2

0072 40115 unused

0074 40117 SP Low Limit R/W Floating Point in Engineering Units.

0076 40119 SP High Limit R/W Floating Point in Engineering Units.

0078 40121 Working Set Point R/W Floating Point in Engineering Units.

On a write to this register the instrument

will update the proper set point according to

the loop’s currently selected set point.

NOTE: Use this register for operator set

point value changes ONLY. Use SP

Override for computer-generated set point

values.

DR4300, DR4500: READ ONLY

007A 40123 Output Low Limit R/W Floating Point in Engineering Units.

007C 40125 Output High Limit R/W Floating Point in Engineering Units.

007E 40127 Output Working Value R/W Floating Point in Engineering Units.

0080 40129 PV Override Value R/W Floating Point in Engineering Units.

UDC2300, UDC2500, UDC3200,

UDC3300, UDC3500 ONLY

0082 40131 SP Override Value R/W Floating Point in Engineering Units.

UDC2300, UDC2500, UDC3200,

UDC3300, UDC3500 ONLY

0084 40133 Output Override Value R/W Floating Point in Engineering Units.

UDC2300, UDC2500, UDC3200,

UDC3300, UDC3500 ONLY

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens NAN 67 Series Bedienungsanleitung Seite 45

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Siemens NAN 67 Series