Siemens CU230P-2 Spezifikationen PDF herunterladen (Seite 16)

Application description

Configuring the CU230P-2 DP

Commissioning of the Control Unit CU230P-2 DP with PROFIBUS ID-No: 35934076

Version 1 Issue May 2009 16/33

PDF_Commissioning_of_CU230P_2_DP_with Profibus_en_V1.doc

5 Configuring the CU230P-2 DP

The CU230P-2 DP control units are preconfigured for use with PROFIBUS,

i.e. PROFIBUS has been selected as the factory setting for the command

and set-point source (P0700 and P1000) and standard telegram 1 has

been selected as the telegram type (P0922).

The IOP or STARTER can be used to check parameters P0700, P1000 and

P0922 in the CU230P-2 DP and, if necessary, adjust them as follows:

Parameter

No.

Designation Parameter

value

Note / comments

P0922

Selection of the PROFIBUS

standard telegram

1 1: Standard telegram 1

P0700[0] Selection of command source 6 6: PROFIBUS

P1000[0] Selection of frequency setpoint 6 6: PROFIBUS

Table 5-1 Configuring the CU230P-2 DP

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 32 33

Keine Kommentare

Siemens CU230P-2 Spezifikationen Seite 16