Siemens MC35 Spezifikationen Seite 13

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 42
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 12
MC35i Terminal Hardware Interface Description
Confidential / Released
s
MC35i_T_HD_v02.00a Page 13 of 42 16.02.2007
2 Key features of MC35i Terminal
Table 7: Key features
Feature Implementation
Transmission Voice, Data, SMS, Fax
Power supply Single supply voltage 8V to 30V
GSM class Small MS
Frequency bands
Dual Band E-GSM 900 and GSM 1800
Compliant to GSM Phase 2/2+
Transmit power
Class 4 (2W) for EGSM900
Class 1 (1W) for GSM1800
GPRS connectivity
GPRS multi-slot class 8
GPRS mobile station class B
SIM card reader Internal
Supported SIM card 3V
External antenna Connected via antenna FME connector
Speech codec Triple rate codec:
Half Rate (ETS 06.20)
Full Rate (ETS 06.10)
Enhanced Full Rate (ETS 06.50 / 06.60 / 06.80)
SMS MT, MO, CB, Text and PDU mode
DATA GPRS:
CSD:
GPRS data downlink transfer: max. 85.6 kbps (see
Table 8)
GPRS data uplink transfer: max. 21.4 kbps (see
Table 8)
Coding scheme: CS-1, CS-2, CS-3 and CS-4
MC35i Terminal supports the two protocols PAP (Password
A
uthentication Protocol) and CHAP (Challenge Handshake
Authentication Protocol) commonly used for PPP connections.
Support of Packet Switched Broadcast Control Channel
(PBCCH) allows you to benefit from enhanced GPRS
performance when offered by the network operators.
CSD transmission rates: 2.4, 4.8, 9.6, 14.4 kbps, non-
transparent, V.110
Unstructured Supplementary Services Data (USSD) support
FAX Group 3: Class 1, Class 2
Audio interface Analog (Microphone, Earpiece)
Serial interface
RS-232 interface, bi-directional bus for AT commands and data
Multiplex ability according to GSM 07.10 Multiplexer protocol
Baud rates from 300bps to 115200bps
Autobauding supports: 1200, 2400, 4800, 9600, 19200, 38.400,
57600 and 115200bps
Phonebook management Supported phonebook types: SM, FD, LD, MC, RC, ON, ME
Reset of MC35i Terminal Reset via AT command or Power Down signal
Seitenansicht 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 41 42

Kommentare zu diesen Handbüchern

Keine Kommentare