Siemens SIMATIC NET CP 343-1 Bedienungsanleitung PDF herunterladen (Seite 2)

Notes on the product

B−2

CP 343-1 Advancedfor Industrial Ethernet / Manual Part B

Release 06/2008

C79000-G8976-C202-04

Notes on the product

Product names

This description contains information on the following product

S CP 343−1 Advanced

Order number 6GK7 343−1GX30−0XE0

as of hardware version 1 and firmware version V1.0

for SIMATIC S7−300 / C7−300 and SINUMERIK 840D power line

Note

In this document, the term CP is used instead of the full product name.

Compatibility with the previous version

Note

Make sure that you read the information regarding extended functions and

restrictions in Chapter 8 of this manual!

Address label: Unique MAC address preset for the CP

The CP is supplied with a MAC address preset in the factory for the PROFINET

interface.

The gigabit interface has its own default MAC address.

The MAC addresses are printed on the housing.

If you configure a MAC address (ISO transport connections), we recommend that

you use the MAC addresses printed on the module for module configuration!

S This ensures that you assign a unique MAC address in the subnet!

S If you replace a module, the MAC address of the predecessor is adopted when

you load the configuration data; configured ISO transport connections remain

operable.

1 2 3 4 5 6 7 ... 79 80

Keine Kommentare

Siemens SIMATIC NET CP 343-1 Bedienungsanleitung Seite 2