Siemens SS2624 Spezifikationen PDF herunterladen (Seite 49)

PC Configuration

Wireless Station Configuration

This section applies to all Wireless stations wishing to use the DSL/Cable Router's Access

Point, regardless of the operating system which is used on the client.

To use the Wireless Access Point in the DSL/Cable Router, each Wireless Station must have

compatible settings, as follows:

Mode

The mode must be set to Infrastructure.

SSID (ESSID)

This must match the value used on the DSL/Cable Router. The default

value is SpeedStream

Note! The SSID is case sensitive.

WEP By default, WEP on the DSL/Cable Router is disabled.

• If WEP remains disabled on the DSL/Cable Router, all stations

must have WEP disabled.

• If WEP is enabled on the DSL/Cable Router, each station must use

the same settings as the DSL/Cable Router.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 97 98

Keine Kommentare

Siemens SS2624 Spezifikationen Seite 49