Siemens FIREFINDER-XLS Technical Information PDF herunterladen (Seite 8)

ID-SP Inner Door Blank Single Plate

ID-MP Inner Door Mounting Plate

The Model ID-MP inner door mounting plate is mounted on

the inner door of a CAB enclosure. ID-MPs are used to

mount Model SCM-8 switch control modules, Model

LCM-8 LED control modules, or Model FCM-6 fan control

modules. Four mounting plates are included in each Model

ID-MP. Each mounting plate has four spaces for control

modules, and can hold either four SCM-8s (one control

module space each), four LCM-8 (one control module

space each), or two FCM-6s (two module spaces each).

Combinations are also allowed. Blank spaces in the ID-MP

can be covered using the Model BCM blank control

module plate. Up to four ID-MPs can be mounted in a

single row on the inner door.

ID-SP Inner Door Blank Single Plate

The Model ID-SP is used to cover any single module blank

spaces on the inner door not used to mount the PMI or an

ID-MP Inner Door Mounting Plate

CAB3 Three Row Enclosure

The Model CAB3 is the largest single FireFinder XLS

enclosure available. It can house up to three CAB-MP

cabinet mounting plates in the enclosure, and three rows

of inner door mounting slots. The outer door can be

configured to open from either side. The CAB3 consists of

the CAB3-BB back box, the CAB3-BD black inner and outer

door package, three CAB-MP cabinet mounting plates, and

one OD-LP lens plate. The outer door has two locks and

key sets installed. A red version called the CAB3R is also

available. Approximate size is 63" high, 26" wide, and 8"

deep.

Enclosure Trim Kits

Trim kits are available for all system enclosures for semi-

flush mounting applications. The Model CAB1-TK (for black

enclosures) and the Model CAB1R-TK (for red enclosures)

fit the CAB1 and CAB1-R enclosures. Similarly, the

CAB2-TK and CAB2R-TK fit the CAB2 enclosure, and the

CAB3-TK and CAB3R-TK fit the CAB-3 enclosure.

Remote Transponders

The FireFinder XLS system can use remote transponders

for mounting additional modules like amplifiers without

requiring a PMI or any control switches. Special doors are

available for systems using CAB2 or CAB3 remote

transponders. These doors, Models CAB2-XBD and

CAB3-XBD, omit the unused inner door and come com-

plete with ventilation louvers built into the door. The

CAB2-XBD fits on a CAB2-BB and the CAB3-XBD fits on a

CAB3-BB. The CAB2-XBD and CAB3-XBD are supplied in

black. Red versions called the CAB2-XRD and CAB3-XRD

are also available. Complete box and door kits are available

as Model CAB2-X and Model CAB3-X.

CAB-MP Cabinet Mounting Plate

The Model CAB-MP cabinet mounting plate provides

mounting for a single row of modules in a FireFinder XLS

cabinet. Four module spaces are available on the CAB-MP.

The CAB-MP is used to mount the CC-5 card cage, the

CC-2 card cage, the PSC-12 power supply, the PSX-12

power supply extender, and the ZAM-80/180 zone amplifiers.

CAB-MP Cabinet Mounting Plate

CAB3 Three Row Enclosure

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens FIREFINDER-XLS Technical Information Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Siemens FIREFINDER-XLS