Siemens CCIS1337-LP Bedienungsanleitung PDF herunterladen (Seite 23)

Assembly and setup

Siemens Building Technologies

Fire Safety & Security Products 04.2006

– The factory setting for the focal lenth (back focus) is for a CS-mount lens (as

delivered).

8.1.1 Setting the focal length

1. Loosen the back focus lock screw (2).

2. Set the IP camera to the back focus operating mode. See

Section 10.5.7 Service configuration.

Î The lens aperture opens completely.

3. Turn the back focus dial (

1) until the image is in focus.

4. Tighten the screw (

2) again carefully.

5. Connect the IP camera to the network using a network cable connected to the

RJ-45 network jack (

10).

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 59 60

Keine Kommentare

Siemens CCIS1337-LP Bedienungsanleitung Seite 23