
Get a start (quick start - introduction)
01.00|FB20|en
35
Fig. 49
5 Hardware configuration is transferred to the PLC.
If the question whether the PLC/CPU should be set to stop is
displayed, the PLC had previously not been set to stop or the
wrong control was selected. The transfer may have to be ab-
orted.
In this example it is assumed that there is no PLC program yet in
the PLC.
If the PLC is now switched to "Run" and everything is correct (in-
cluding the connected hardware), the system should go into and
remain in "Run" without any disturbance.
Kommentare zu diesen Handbüchern