Siemens GC..M.. Bedienungsanleitung PDF herunterladen (Seite 17)

GORATU MAQUINAS HERRAMIENTA,S.A.

GCM 4 / 5 / 6 / 8 / 10 15 JANUARY - 2011

- CNC SIEMENS 840 D

l STANDARD USER FUNCTIONS

§ Conversational programming language Shop Turn and DIN/ISO.

§ NCU 571.5: Permits up to 6 axes and 6 heads.

§ Operator panel OP32S with Colour screen LCD 10,4”.

§ Complete alphanumeric keyboard.

§ Speed of communication device 1,5 Mbauds.

§ Memory of 6 Mbytes for work piece programmes.

§ Ethernet connections and serial RS 232-C.

§ Software MCIS DNC Machine for transmission programmes through Ethernet.

§ PCU 50 hard disk 40GB /15 GB for user (LOCAL BACKUPS AND SOFTWARE TO BE INSTALLED).

§ Machining cycle’s characteristic of milling machines through dialogue-based

programming.

§ Possibility of screen customisation.

§ Teleservice through MODEM (phone line) or Ethernet.

§ Diagnosis: Interconnection signals, NC alarms, PLC alarms…

§ Backlash compensation, error of quadrant change, tool correction and RTCP tool

orientation.

§ Machine-operators interface in Russian language

l SIEMENS MOTORS

MODEL TORQUE (Nm)

POWER (kW)

SIEMENS MAIN MOTOR

1PH7 167-2ND23-0BC2 267 28

POWER AND TORQUE DIAGRAM FOR 3000 RPM / 4000 RPM

Two operation modes may be deduced from the power diagram:

• Constant torque [1068/1316 Nm] at speed of 0÷250 min-¹

• Constant power [28/34,5 kW] at speed of 251÷3000 min-¹ / 4000 min-¹

The horizontal line shows the working zone at constant power, i.e. the total power of the main motor may be

used [28/34,5 kW]. The slanted lines show the constant torque zone in which the power is proportionally

reduced as the speed decreases. Hence, using speeds lower than 250 min-1, motor progressively decreases.

MODEL TORQUE (Nm)

POWER (kW)

X AXIS SIEMENS SERVOMOTOR

1FK7 103-5AF71-1AH0(with brake)

36 5,37

Y AXIS SIEMENS SERVOMOTOR

1FK7 103-5AF71-1AG0 36 5,37

Z AXIS SIEMENS SERVOMOTOR

1FK7 103-5AF71-1AG0 36 5,37

l AXIAL FORCE OR PUSHING FORCE OF X, Y, Z AXES

X Axis – Pinion-Rack (N).................................................................................................... 31140,43

Y Axis – Ball screw (N)....................................................................................................... 13901,58

Z Axis – Ball screw (N)....................................................................................................... 18535,44

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens GC..M.. Bedienungsanleitung Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Siemens GC..M..