Siemens GC..M.. Bedienungsanleitung PDF herunterladen (Seite 2)

http://www2.merrick-inc.com/mct/GCMModbus.pdf Page 2 2014-05-18/Lars

Setting the GCM communications parameters

Set up the serial port in TMCI page X (Type PX<Enter>). Select which of the two serial ports (port

1 or 2) you will use. Port 1 is normally used for a user interface. Rotate between ports using

X<Enter>.

PX, TMCI Port Settings Screen

Parameter

Comment

A : NewProt

Protocol Selector. 1 for Modbus ASCII, 2 for Modbus RTU

LastProt

Last and currently used protocol. Unchanged until you restart the port.

B: BdIdx

Index of the baud rate used:

0 300

1 1200

2 2400

3 4800

4 9600

5 19200

6 38400

7 57600

8 115200

9 230400

Set to the highest baudrate supported by the Modbus master and all slaves. Use

6, 34800 baud for Anybus Communicators.

BLT>

PX X: Port 2 (UART1) settings

A: NewProt 2|LastProt 2|B: BdIdx 5|C: LnPar 0x03|

MB RTU | MB RTU | 19200 | |

En:WProt 0x0BFF|WOrder 0x0000|IntFra 0x0000|

Fn:Tag 1 0|Tag 2 0|Tag 3 0|Tag 4 0|Tag 5 0

Protocol |1: Unit Addr|2: Map Size|3: Max Time|4: LRC

Gn:All Modbus | 1| 1| 10.00|

Hn:DF-1 | 0| 1| 10.00| 0

In:CITMaster | 49| | 2.00|

Jn:UISServer | 1| | 20.00|

Kn:Scalenet | 49| 1| 10.00|

Scalenet Spec| Start Char| End Char| No Powup Hnd|

|L: 0x0A|M: 0x0D|N: 1|

Mon Period ms|O: 500| | |

R: Restart port

1 2 3 4 5 6 7 ... 10 11

Transmit 7

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens GC..M.. Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Siemens GC..M..