Siemens MC35 Bedienungsanleitung PDF herunterladen (Seite 24)

Remote-SAT User's Guide

MC35_SAT_01_v02.00 Page 24 of 65 11.01.2002

1.4.2 AT^SSTGI Remote-SAT Get Information – Refresh (1)

Write command

AT^SSTGI=1

This command is to be used upon receiving an unsolicited result code

^SSTN:1.

The response from the module indicates the type of REFRESH that is going to

be undertaken.

Response

^SSTGI: <cmdType>, <commandDetails> <CR> <LF>

Parameters

<cmdType> 1 – Proactive command ID, see Table 1

<commandDetails> Unsigned Integer, range 0 – 255, used as an

enumeration.

0 SIM Initialization and Full File Change

Notification;

1 File Change Notification;

2 SIM Initialization and File Change Notification;

3 SIM Initialization;

4 SIM Reset; ME is performing a SIM reset.

Therefore a Terminal Response should not be

issued.

5 to 255 = reserved values.

For every return value of <commandDetails> except 4 (SIM reset) the external

application shall react as follows:

1. Issue the related Terminal Response AT^SSTR=1,<status>.

2. If <status> is 0 (Command performed successfully) the TA is requested to

show a “Please wait” alert window on its screen until it will receive the RSAT

notification ^SSTN:101 (Terminate proactive command REFRESH).

Reference

Siemens

Note

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 64 65

Keine Kommentare

Siemens MC35 Bedienungsanleitung Seite 24