Siemens OpenStage 10 T Bedienungsanleitung PDF herunterladen (Seite 112)

Step by step

Miscellaneous functions

112

The system will be available for remote configuration via

the application for a specified time period.

Fax received

If the system has a Fax/DID Module and a fax machine,

you can program a key to indicate when a fax was re-

ceived.

Required: Fax/DID Module installed and configured.

Confirm.

R Press the illuminated "FAX RECD" key.

Assigned group

The associated group feature provides quick access to

extensions that must communicate continually. With

the associated group feature several non-master exten-

sions can be assigned to one master telephone.

Required: The associated group feature must be con-

figured (see Programming an extension - associated

group, in the programming manual),

For example, by using "”Programming the keys”

Æ page 115" on system telephones, you can program

"”Direct communication call” Æ page 39" (code *80) +

destination extension (non-master in the master, and

master in the non-master) in the master extension.

When the programmed key is activated, the extensions

enter conversation mode (the speaker at the extension

called is activated). If the master extension initiates the

call, it is able to talk and listen. If a non-master extension

initiates the call, however, it can only listen since Mute

mode is activated at the master extension. To prevent

automatically enabling Mute mode, you must activate ""

(*96) for the master extension ”Handsfree answer-

back” Æ page 40 (*96).

FAX RECEIVED?

[1] There are 8 groups available with 16 extensions each. An associat-

ed group is assigned to each master telephone. An non-executive

extension can be used as secretary telephone for many groups at

the same time.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 150 151

Keine Kommentare

Siemens OpenStage 10 T Bedienungsanleitung Seite 112