Siemens OpenStage 10 T Bedienungsanleitung PDF herunterladen (Seite 22)

Step by step

Functions used when making calls

...Using a group of external lines

An extension can originate external call or calls to a

Master PABX through a group of external lines.

j Enter the number of the appropriate group of external

lines to access an external line.

•

0 or 890 up to 899

= group of external lines;

w Wait for a dial tone.

j Enter the external number you want to call.

w [ Wait for the call to be answered. Start conversation.

... When a group is busy

If an overflow group was configured when the system

was programmed, the call is made using a second

group of external lines.

The second group of external lines takes into account

the extension’s class of service.

Switching to speakerphone

Conversation using the handset

n and \ Press and hold this key while placing the handset on the

hook. Release the key and resume the call.

Switching to Handset

Speaking with the speakerphone

^ and [ Lift the handset and resume conversation.

[1] When operating as a Sub-PABX for external calls or for calling ex-

tensions of a Master PABX, select the group of external lines be-

fore selecting the second external access code (0...9 or 00...99).

Or, select the extension number, as appropriate (see Important

Programming Data - Assigning groups of External Lines to Exten-

sions in the Programming manual). When a group of external lines

is programmed as a Sub-PABX a false dialing tone will not be gen-

erated.

Overflow group for external calls (see in Programming manual, Ex-

ternal line settings- Overflow for a group of external Lines).

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 150 151

Keine Kommentare

Siemens OpenStage 10 T Bedienungsanleitung Seite 22