Siemens HC15 Spezifikationen PDF herunterladen (Seite 57)

HC15 AT Command Set

5. Security Commands

HC15_ATC_V01.001 Page 57 of 234 2/16/07

Confidential / Released

5. Security Commands

The AT Commands described in this chapter allow the external application to determine various security related

settings.

5.1 AT+CLCK Facility lock

AT+CLCK can be used to lock, unlock or interrogate a network or ME <facility>. The command can be

aborted when network facilities are being set or interrogated.

Syntax

Parameter Description

Phone security locks set by client or factory

Primarily intended for the client to take safety precautions, "SC"can be configured individually.

Parameter <class> is not applicable to security locks.

See examples below for further details.

“SC“ SIM (lock SIM cards). SIM requests password upon ME power-up and when

this lock command is issued.

<password>: SIM PIN1.

“FD“ SIM fixed dialling memory: If the mobile is locked to "FD", only the phone num-

bers stored to the "FD" memory can be dialled. (Capacity of FD phonebook

depending on the SIM card).

<password>: SIM PIN 2.

If a lock on the SIM fixed dialing memory is active, the following applies:

Test Command

AT+CLCK=?

Response(s)

+CLCK:list of supported <facility>s

Write Command

AT+CLCK=<facility>, <mode>[, <password>][, <class>]

Response(s)

if <mode> is not equal 2 and command successful:

if <mode>= 2 and command successful:

+CLCK: <status>[, <class>]

[+CLCK: <status>[, <class>]]

[+CLCK: ...]

If error is related to ME functionality

+CME ERROR

Reference(s) PIN USB0-MDM USB0-APP Last

GSM 07.07, GSM 02.04, GSM 02.88,

GSM 03.88, GSM 04.88

+ + + -

(str)

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 233 234

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens HC15 Spezifikationen Seite 57

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Navigatoren Siemens HC15