Siemens SCALANCE X-200 Betriebsanleitung PDF herunterladen (Seite 80)

Product properties

3.20 Displays

Industrial Ethernet SCALANCE X-100 and SCALANCE X-200 Product Line

3-62 Operating instructions, 09/2006, A5E00349864 Release 7

3.20 Displays

3.20.1 Fault indicator (red LED)

Fault indicator (red LED)

If the red LED is lit, the SCALANCE X-100/200 has detected a problem.

The signaling contact opens at the same time.

The LED signals that the device can adopt the following statuses:

Device type SCALANCE LED lit red LED flashing red LED not lit

X108 1, 2 - 10

X104-2 1, 2 - 10

X106-1 1, 2 - 10

X208 1, 2, 3, 4 9 10

X208PRO 1, 2, 3, 4 9 10

X204-2 1, 2, 3, 4 9 10

X206-1 1, 2, 3, 4 9 10

X204-2 LD 1, 2, 3, 4 9 10

X206-1 LD 1, 2, 3, 4 9 10

X202-2IRT 1, 2, 3, 4, 5, 6, 7 9 10

X204IRT 1, 2, 3, 4, 5, 6, 7 9 10

X202-2P IRT 1, 2, 3, 4, 5, 6, 7, 8 9 10

X201-3P IRT 1, 2, 3, 4, 5, 6, 7, 8 9 10

X200-4P IRT 1, 2, 3, 4, 5, 6, 7, 8 9 10

1. Link down event on a monitored port.

2. Failure of one of the two redundant power supplies.

3. C-PLUG

4. Device startup, the LED is lit for approx. 20 seconds.

5. There is a BUS fault BF in PROFINET. Date exchange with the controller could not be

established.

6. Redundancy manager connected through.

7. Switchover of standby connection.

8. Maintenance request or maintenance requirement.

9. An internal fault was detected. Inform the maintenance personnel and, if necessary, send

the device in for repair.

10. No fault detected by the SCALANCE X-100/200.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 197 198

Keine Kommentare

Siemens SCALANCE X-200 Betriebsanleitung Seite 80