Siemens HiPath 8000 Spezifikationen PDF herunterladen (Seite 58)

HiPath 8000-Based Station Call Forwarding User Features

A31003-H8022-F100-2-7618, October 2006

4-14 HiPath 8000 V2.2, Feature Description Guide

call_forwarding_user_features.fm

CDR

4.12.2 Functional Operation

The system administrator sets the RTP parameter Srx/Main/CFVMCompatibility to specify if

station CFBL, station CFDA, or both can be assigned to a subscriber at the same time CFVM

is subscribed, as follows:

● Station CFBL:

– When set to True, CFBL and CFVM can be assigned to the same subscriber. When

both are assigned and active, CFBL takes precedence in a busy-line situation.

– When set to False, CFBL and CFVM cannot be assigned to the same subscriber.

● Station CFDA:

– When set to True, CFDA and CFVM can be assigned to the same subscriber. When

both are assigned and active, CFDA takes precedence in a no-answer situation

because the no-answer timer for the CFVM feature does not start.

– When set to False, CFDA and CFVM cannot be assigned to the same subscriber.

The system administrator can also specify the conditions under which a received MWI

indication from the VMS is considered valid. Based on the status of the subscriber’s CFVM

feature:

● If it is active: An MWI indication can be accepted and processed for a voice mail

subscriber.

● If it not active: The acceptance of an MWI indication for a voice mail subscriber is based

on the setting of the RTP parameter Srx/Main/MwiOnVMInactive:

– When set to True, an MWI indication is accepted and processed.

– When set to False, an MWI indication is ignored.

4.13 CDR

When a call is forwarded, CDRs are generated as follows:

● One

standard CDR

for the call leg that takes place between the original calling party and

the final forwarded-to (connected) party. This CDR type is generated for all calls.

● One

call forwarding CDR

for each call leg created when the original call is forwarded.

Because the HiPath 8000 permits up to five forwards per call, up to five of these CDRs can

be generated.

For example, assume that party A calls party B. Party B forwards to party C; party C then

forwards to party D. In this scenario:

● A standard CDR is generated for the A-to-D call.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 237 238

Keine Kommentare

Siemens HiPath 8000 Spezifikationen Seite 58