Siemens HiPath 8000 Spezifikationen PDF herunterladen (Seite 90)

Other User Features

A31003-H8022-F100-2-7618, October 2006

5-30 HiPath 8000 V2.2, Feature Description Guide

other_user_features.fm

Teleworking

● 2-digit speed calling entry: *75, followed by the number (20 through 49) to associate with

the entry, and the number to store for the entry

To dial a speed calling list entry, the subscriber goes off-hook, receives a dial tone, and enters

the number associated with the entry—for example, to dial entry 23, the subscriber enters the

digits 23. After entry, if the subscriber does not select Dial?, the number is automatically

dialed after a 4-second timeout expires.

5.25.3 Guidelines for Implementation and Use

● Stations with speed calling should be given standard originating treatment up to the point

where the first digit is collected.

For stations with 1-digit speed calling: 4-second nominal timing (3 to 5 seconds is

acceptable, 4 seconds is preferred) should be initiated when the first dialed digit received

is one of the digits 2 through 9. If the first dialed digit is one of the digits 2 through 9, is

followed by the user selecting Dial? or by a 4-second timeout, and the subscriber has

access to the feature, the call completes to the corresponding address in the speed calling

list.

For stations with 2-digit speed calling: 4-second timing should be initiated when the

second dialed digit is received, provided that the first digit dialed is one of the digits 2

through 4. If the second digit collected is one of the digits 0 through 9; the first digit was 2,

3, or 4; and the subscriber has access to the feature, the system determines if this digit is

followed by the user selecting Dial? or by a 4-second timeout. If so, the call completes to

the corresponding address in the speed calling list.

● Speed calling can be used any time dialing is appropriate; however, the speed calling entry

must supply all dialing information, including applicable access codes.

● The HiPath 8000 can provide each subscriber a shared list and an individual list. In this

instance, one list must be a 1-digit list and the other a 2-digit list. In the case of shared lists,

only one subscriber can make changes to the list.

5.26 Teleworking

The teleworking feature provides a solution that permits HiPath 8000 users who work remotely

to have access to the telephone features they can access while at their primary office locations.

optiClient 130 S users need only have a VPN connection in order to invoke the teleworking

feature. Contact your Siemens representative about the availability of teleworking solutions

applicable to other SIP endpoints. Refer to the

HiPath 8000 Overview Guide

for detailed

information about the software that permits teleworking for HiPath 8000 users.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 237 238

Keine Kommentare

Siemens HiPath 8000 Spezifikationen Seite 90