Siemens SIMATIC TI505 Spezifikationen PDF herunterladen (Seite 19)

Simatic/TI 505 Serial Driver Help

2. The location is read only in the device.

3. The device could not perform the write operation.

Solution:

Refer to the list of error codes.

See Also:

Error Codes

Bad address in block [<start address> to <end address>] on device '<device

name>'

Error Type:

Serious

Possible Cause:

An attempt has been made to reference a nonexistent location in the specified device.

Solution:

Verify the tags assigned to addresses in the specified range on the device and eliminate ones that reference

invalid locations.

Error Codes

Error Code Description

2 Address out of range

3 Requested data not found

4 Illegal task code requested

7 Fatal error detected

9 Incorrect amount of data sent with request

10 Illegal request in current operational mode

12 Attempted write operation did not verify

13 Illegal number of ASCII characters received (NITP)

15 Data not inserted

16 Data not written

17 Invalid data sent with command

19 The store and forward buffer is busy

22 Attempted to write to a protected variable

28 Processor busy - Cannot complete the requested operation

Note: If the error code returned is 2, the driver will remove the tags in the block from its scan list.

www. kepware.com

1 2 ... 14 15 16 17 18 19 20 21 22

Keine Kommentare

Siemens SIMATIC TI505 Spezifikationen Seite 19