Siemens KDN Series Spezifikationen PDF herunterladen (Seite 114)

4 Communication settings and guide of HMI connecting with controller

Internal Output

R 0000-FFFF

------ HHHH

Data Area

M 0000-FFFF

------ HHHH

First CPU Link

L 00000-03FFF

------ HHHHH

Second CPU Link

L 10000-FFFFF

------ HHHHH

On Delay Timer

TD 00000-65535

------ DDDDD

External Input

------ WX 000.00-05A.09 HHH.DD Read Only

External Output

------ WY 000.00-05A.09 HHH.DD

Remote Input

------ WX 100.00-9FF.09 HHH.DD Read Only

Remote Output

------ WY 100.00-9FF.09 HHH.DD

Word Internal Output

------ WR 0000-C3FF HHHH

Special Word Output

------ WRF 000-FFFF HHHH

Data Area

------ WM 0000- FFFF HHHH

First CPU Link

------ WL 0000-03FF HHHH

Second CPU Link

------ WL 1000-FFFF HHHH

Timer Counter

------

TC 00000-65535 DDDDD

Note：X0.015 in the HMI match x15 in the PLC,Y1.000 in the HMI match Y100,WX0.09 in the HMI

match WX9 in the Plicate effective address is deleted radix point and the first zero behind radix point.

The list of address correspondence

Bit Address

Word Address

PLC address

Notes

X 00.000-00.047

X 0000-0047

Y 01.000-01.031

Y 0100-0131

WX 000.00-000.03 WX 0000-0003

WY 001.00-Y001.01 WY 0010-0011

Note: The range of X, Y, WX, WY is according to the I/O assign. Make sure the I/O address before using

the register.

Note:

1. Communication setting

 EH series, only port1 supports procedure 2.Switch DIP and change special Internal Input (WR) value to

select procedure.

 EH150 series，

only EHCPU***A/448/516/548 support procedure 2.

 EH PLC connect with PC only by procedure 1.

2. CPU related actions

EH150

 DIP 5 must be set on.

 If DIP 5 is on, which procedure (1 or2) to use by judging the value of the WR F037.The highest bit of

WR F037 must be on, so that the other bits can be written in. The data keep on, when turn on the power

again.

o By entering 0x8000, turn on the power again and value of the address is 0x0000.After settings,

communication with procedure 1.

o By entering 0xC000, turn on the power again and value of the address is 0x4000.After settings,

communication with procedure 2.

- 111 -

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 381 382

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens KDN Series Spezifikationen Seite 114

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Siemens KDN Series