Siemens FIREFINDER-XLS Schnellstart Benutzerhandbuch PDF herunterladen (Seite 10)

1-6 DESCRIPTION

FIREFINDER-XLS INSTALLATION, OPERATION AND MAINTENANCE MANUAL | CHAPTER 1

RPM Printer Interface The RPM Printer Interface provides a parallel port to the

FireFinder-XLS system. The RPM is compatible with the

PAL-1 printer.

CAB Enclosures The FireFinder-XLS system can be housed in one of

three enclosures: CAB1, CAB2, or CAB3. The CAB1 is a

single-row enclosure that consists of a backbox, front

door and inner door that is shipped assembled. The

CAB2 and CAB3 are two-row and three-row enclosures

respectively with the backbox and doors (inner and

outer) shipped separately.

HTSW-1 Tamper Switch The HTSW-1 Tamper Switch is a three-position switch that monitors

the opening of the FireFinder-XLS enclosure and reports a security

condition. Closing the door automatically returns the switch to its

normal operating position. The switch can be pulled out to indicate a

closed position for maintenance purposes.

Batteries The BP-61 is a 24V 15 AH battery. The BP-61 is recommended

for the NFPA 72 Local and 72 Proprietary and the UL 1076

Systems. Actual battery size depends on System configuration.

See the Battery Calculation section of the PSC-12 Installation

Instructions, P/N 315-033060, for further information.

The BTX-1 batteries are a pair of 12V, 33 AH batteries that are

housed in the bottom of the CAB enclosure. The BTX-2 batteries

are a pair of 12V, 75 AH batteries. The BTX-3 batteries are a pair

of 12V, 100 AH batteries. Actual battery size depends on System configuration.

See the Battery Calculation section of the PSC-12 Installation Instructions,

P/N 315-033060, for further information.

OPTIONAL MODULES The modules listed below are available as options to the FireFinder-XLS system.

CRC-6 Relay Module Each CRC-6 module provides six fully programmable relays. Each relay

contains one set of SPDT contacts rated at 4A, 30 VDC/120 VAC resistive and

3.5A, 120 VAC (0.6 PF) inductive. All relay coils are supervised to ensure

proper operation.

Individual relays can be automatically activated or deactivated through control

by event and time based logic contained in FireFinder-XLS. Each relay may

also be either manually controlled or may be disarmed through the PMI.

HNET

RELAY1

RELAY5

RELAY4

RELAY2

RELAY3

RELAY6

CARD FAIL

24V FAIL

HNET FAIL

RESET

POWER

CRC-6

BACKBOX

OUTER DOOR

INNER DOOR

MOUNTING PLATE

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens FIREFINDER-XLS Schnellstart Benutzerhandbuch Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Siemens FIREFINDER-XLS