Siemens XPS15F Bedienerhandbuch PDF herunterladen (Seite 7)

MOUNTING

DO’S AND DON’TS

Special handling precautions must be taken to protect the face of the transducer from any

damage.

Mount the transducer so that it is above the maximum material level by at least the blanking

value. Refer to the associated transceiver manual.

On liquid applications, the transducer must be mounted so that the axis of transmission is

perpendicular to the liquid surface.

On solids applications, a Milltronics Easy Aimer should be used to facilitate aiming of

the transducer.

Do not overtighten mounting. Hand tightening of the mounting hardware is sufficient.

Secure installation by connecting a safety chain from the transducer to a structural member.

Consider the optional temperature sensor when mounting the transducer.

MOUNTING - SOLIDS APPLICATIONS

Easy Aimer

(typical model)

transducer

safety chain

7ML19981AK01.2 XPS/XCT Transducers 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Keine Kommentare

Siemens XPS15F Bedienerhandbuch Seite 7