Siemens PC 670 Wartungshandbuch Seite 35
- Seite / 195
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Setting Up and Operating the Computing Unit
3-7
SIMATIC Panel PC 670 Computing Unit Equipment Manual
Edition 12/01
3.4 Connecting Peripheral Devices
Note
Make sure the components you insert exhibit industrial compatibility when
connecting peripheral devices
Printer connection via parallel port
To connect your printer, perform the following steps:
1. Turn off the computing unit and the printer.
2. Plug the printer cable onto the parallel port, LPT 1.
3. Connect the printer cable to the printer.
4. Tighten (screw) the connector on the port.
COM 2
COM 1
Connector (serial)
LPT1
Socket (parallel)
Socket (parallel)
Figure 3-4 Printer Connection
Caution
Danger of damage being caused to the device
Connect printers to the parallel port only when the device on the LPT 1 port is
turned off (printer likewise turned off).
Make sure you are using the correct port. If you interchange the connectors,
or use wrong connecting cables, the port might be damaged.
Before inserting the connecting cables, the static charge of your body, the device
and the connecting cables must be brought to the same level. You can do this by
briefly touching the metal housing.
Use the original cable to establish the connection.
- Qualified Personnel 2
- Correct Usage 2
- Safety Guidelines 2
- Trademarks 3
- Impressum 3
- About this manual 5
- Where to find what 5
- S Fault diagnosis 5
- S Technical Data 5
- S ESD Guidelines 5
- Notation 6
- Other Sources of Assistance 6
- Training Center 8
- Further Support 9
- Edition 12/01 10
- Table of Contents 11
- Product Overview 15
- Installation 16
- Functions 16
- Additional applications: 16
- Remote mount form factor 16
- Commissioning 19
- Unpacking the item 20
- (option for custom solutions) 24
- Grounding Measures 26
- 2.4 Transportation 28
- Chapter Overview 29
- Reset Key 31
- Front ports 31
- Mains supply 33
- Country-Specific Notes 34
- Figure 3-4 Printer Connection 35
- Using a mouse 36
- Connecting a PS/2 mouse 36
- Connecting a serial mouse 37
- Connecting a PS/2 keyboard 37
- Connecting USB devices 38
- 3.5 Working with PC Cards 39
- Installing PC cards 40
- 3.6 Drives 42
- Configuration) 43
- Point-to-point connection 45
- (Socket) 46
- Jumper settings 48
- Changing the jumper setting 48
- Connection 50
- MPI/PROFIBUS-DP network 50
- How the network functions 51
- Hardware requirements 51
- Industrial Ethernet 52
- 3.11 Connection under Windows 52
- Computing Unit Expansions 53
- 4.1 Opening the Device 54
- 4.1.1 Requirements 54
- Screws on the housing cover 56
- 4.1.5 The Motherboard 59
- Components on the motherboard 60
- Bank 0 Bank 1 61
- Backup battery removed 64
- 4.4 Installing ISA/PCI Cards 65
- Fixing screw of device for 67
- CD-ROM Drive with Cover 72
- Power supply unit 75
- Fan Plastic rivets 78
- 4.9 Processor Upgrade 80
- TTY jumpers (S1) 82
- 4.12 Reset Button 86
- 5.1.1 The Main Menu 90
- Figure 5-6 Summary Screen 95
- Hardware Options 96
- 5.1.2 The Advanced Menu 98
- COM/LPT Configuration 99
- PCI Configuration 100
- PCI Device Field 101
- On board PCI Ethernet field 102
- 5.1.3 The Security Menu 105
- 5.1.4 The Power Menu 107
- 5.1.5 The Boot Sequence Menu 109
- 5.1.6 The Version Menu 111
- 5.1.7 The Exit Menu 112
- Hardware Information 117
- Basic system 118
- 6.3 Hardware Address Table 120
- Memory address assignment 121
- I/O address assignment 122
- DMA assignment 123
- 6.4 Interrupt Assignment 124
- 6.5 Video Modes 126
- 6.6 Monitoring Functions 127
- 6.6.1 Overview 127
- 6.6.4 Watchdog (WD) 128
- Reaction Option 129
- Acknowledge WD Always 129
- 6.7 Ports 130
- 6.7.1 External Ports 130
- Gender changer for COM1 132
- MPI/DP port 135
- Ethernet RJ45 connection 135
- VGA port 136
- Display port (CMOS, X420) 137
- Display port (LVDS), X400 139
- Port to bus module (X1) 144
- DC port of the power supplies 146
- 6.8 Bus Module 151
- ISA slot pin assignment 153
- PCI slot pin assignment 155
- 6.9 Hard Disk Drive 157
- 6.10 Floppy Disk Drive 157
- 6.11 AC and DC Power Supplies 158
- 6.12 Connecting Cables 159
- 7.1 Description 164
- 7.1.2 Dimensions 165
- 7.1.3 Mounting 165
- 7.2 Cable connection 166
- 7.3 Spare parts 166
- 7.4 Technical Specifications 166
- Computing unit 167
- Transmitter housing 167
- Error Diagnostics 169
- A.1 Diagnosing Errors 170
- Technical Specifications 175
- ESD Guidelines 181
- SIMATIC HMI Documentation 183
- Glossary 187
Verwandte Produkte und Handbücher für PC / Workstation Barebones Siemens PC 670
(208 Seiten)
(276 Seiten)
(80 Seiten)
(32 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.719 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern