Siemens EF 7850 Series Spezifikationen PDF herunterladen (Seite 23)

04/04 Control via the Operator Panel

SINAMICS G130 - Operator Panel AOP30

Operating Manual

5-21

5.6.4 AOP30 Diagnosis

Software/Database Version

You can use this menu to display the firmware and database versions.

The database version must be compatible with the drive software status (you can

check this in parameter r0018).

Battery Status

In this menu, you can display the battery voltage numerically (in Volts) or as a bar

display. The battery ensures that the data in the database and the current time are

retained.

When the battery voltage is represented as a percentage, a battery voltage of

≤ 2 V

is equal to 0%, and a voltage of

≥ 3 V to 100%.

The data is secure up to a battery voltage of 2 V.

• If the battery voltage is ≤ 2.45 V, the message "Replace battery" is displayed in

the status bar.

• If the battery voltage is ≤ 2.30V, the system displays a popup window with the

following information "Warning: weak battery".

• If the battery voltage is ≤ 2 V, the system displays a popup window with the

following information: "Warning: battery is empty".

• If the time and/or database are not available after the system has been

switched off for a prolonged period due to the voltage being too low, the loss is

established by means of a CRC check when the system is switched on again.

This triggers a message instructing the user to replace the battery and then load

the database and/or set the time.

For instructions on changing the battery, see Section 6.1.

Communication

In this menu, you can call up information on the communications status between

the AOP and the drive.

Key Test

In this screen, you can check that the keys are functioning properly. Keys that you

press are represented on a symbolic keyboard on the display. You can press the

keys in any order you wish. You cannot exit the screen (F5 – "back") until you have

pressed each key at least once.

NOTE

You can also exit the key test screen by pressing any key and keeping it pressed.

LED Test

In this screen, you can check that the 4 LEDs are functioning properly.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 37 38

Keine Kommentare

Siemens EF 7850 Series Spezifikationen Seite 23