Siemens EF 7850 Series Spezifikationen PDF herunterladen (Seite 24)

Control via the Operator Panel 04/04

SINAMICS G130 - Operator Panel AOP30

5-22 Operating Manual

5.7 Operation via the Operator Panel (LOCAL Mode)

You activate the control keys by switching to LOCAL mode. If the green LED in the

LOCAL/REMOTE key does not light up, the key is not active.

5.7.1 LOCAL/REMOTE Key

Activate LOCAL mode: press the LOCAL key

LOCAL mode: LED lights up

REMOTE mode: LED does not light up: the ON, OFF, JOG, direction reversal,

faster, and slower keys are not active.

Settings: Menu: Commissioning / Service – AOP Settings – Control Settings

Save LOCAL mode (factory setting: yes)

• Yes: "LOCAL" or "REMOTE" operating mode is saved when the supply voltage

is switched off, and restored when the supply voltage is switched back on.

• No: "LOCAL" or "REMOTE" operating mode is not saved. "REMOTE" is active

when the supply voltage is switched back on.

LOCAL/REMOTE also during operation (factory setting: no)

• Yes: You can switch between LOCAL and REMOTE when the drive is switched

on (motor is running).

• No: Before the system switches to LOCAL, a check is carried out to determine

whether the drive is in the operational status. If so, the system does not switch

to LOCAL and outputs the message "Local not possible". Before the system

switches to REMOTE, the drive is switched off and the setpoint is set to 0.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 37 38

Keine Kommentare

Siemens EF 7850 Series Spezifikationen Seite 24