Siemens GS..D.. Bedienungsanleitung PDF herunterladen (Seite 8)

How to configure an Anybus PROFIBUS Slave module with a Siemens Step7 PLC

SCM-7032-026

Rev 2.1

DP, PROFIBUS master

odu

Figure 5 Adding the hardware to the configuration.

Add a rail, the power module and the PLC as shown above. The next step is to double click on the DP,

PROFIBUS master, module to configure the PROFIBUS network. Click on properties in the dialogue as

shown below.

Figure 6 Changing the properties of the PROFIBUS module and defining a new PROFIBUS network.

Then click on new to define a new network.

www.anybus.com HMS Industrial Networks AB

Page 8 (30)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 29 30

Keine Kommentare

Siemens GS..D.. Bedienungsanleitung Seite 8