Siemens CA 343 Series Bedienungsanleitung PDF herunterladen (Seite 9)

Figure 13

Once in NetPro, select the CPU and double click on the first line in the table below. This will open a window

to insert a new connection (Figure 14).

Figure 14

Make sure Unspecified is selected and the connection type is S7, then click OK.

A property window for the S7 connection pops up. Enter the following information as shown in figure 15:

1. Make sure “Establish an active connection” is NOT checked; this makes the PLC the Server.

2. Make sure the Interface selected is CP 343-1.

3. Enter the Partner name (any name works), in this example G306. The partner is the device the S7

will create a connection.

4. Enter the Partner IP address, in this example 192.168.200.10.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

Keine Kommentare

Siemens CA 343 Series Bedienungsanleitung Seite 9