Siemens SITRANS P Bedienungsanleitung PDF herunterladen (Seite 103)

UMSITRPDS3-1 On-Line Operation

November 2010

6-5

6.2 LOCAL OPERATION WITH THE MAGNETIC PUSHBUTTONS

The transmitter can be configured locally using the magnetic pushbuttons, shown below. Table 6-2 shows

the operating modes and configuration parameters accessed by pressing the M pushbutton. These

configuration parameters are also available using the HART Communicator.

Note

A selected mode will time out after about 2 minutes of pushbutton inactivity and

the displayed parameter value will be stored.

A polling address of zero (0) must be stored for the magnetic pushbuttons to

function. The magnetic pushbuttons will be disabled if a polling address of 1-15

has been stored, as indicated by a C in the lower left quadrant of the display.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 221 222

Keine Kommentare

Siemens SITRANS P Bedienungsanleitung Seite 103