Siemens SLI-5310 Betriebsanleitung PDF herunterladen (Seite 54)

ERN 1300 series

Incremental rotary encoders

• Stator coupling 06 for axis mounting

• Taper shaft 65B

$ = Bearing of mating shaft

N = Required mating dimensions

P = Measuring point for operating temperature

¢ = Clamping screw for coupling ring, width A/F 2. Tightening torque: 1.25 – 0.2 Nm

£ = Die-cast cover

¤ = Screw plug, width A/F 3 and 4. Tightening torque: 5 + 0.5 Nm

¥ = PCB connector

¦ = Reference mark position indicated on shaft and cap

§ = M10 back-off thread

¨ = M10 back-off thread

ª = Compensation of mounting tolerances and thermal expansion, no dynamic motion permitted

« = Direction of shaft rotation for output signals as per the interface description

*)  65 +0.02 for ECI/EQI 13xx

Alternative:

ECN/EQN 1300 mating dimensions with slot for stator

coupling for anti-rotation element also applicable.

Antriebsgeber_en_2013.indd 54 12.11.2013 06:55:30

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 95 96

Keine Kommentare

Siemens SLI-5310 Betriebsanleitung Seite 54